Further information for ABB Automation OTDC16F2 disconnect switch 1SCA121454R1001
General
Colour control element
Black
Colour housing
Grey
Degree of protection (IP), front side
IP20
Depth
66.2
Device construction
Built-in device fixed built-in technique
Height
89
Number of auxiliary contacts as change-over contact
0
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of poles
2
Number of switches
1
Rated current
25
Rated voltage at DC
1000
Type of control element
Door coupling rotary drive
Type of electrical connection of main circuit
Screw connection
Width
52.5
Floor mounting
Interlockable
Suitable for distribution board installation
Suitable for front mounting centre
Suitable for intermediate mounting
Version as emergency stop installation
Version as main switch
Version as maintenance-/service switch
Version as reversing switch
Version as safety switch
Voltage release optional
The ABB switch disconnector OTDC16F2 is a manually operated disconnect and switching device for industrial DC applications. It is rated for a nominal voltage of 1000 V DC and a nominal current of 25 A, and is particularly suitable for use in installations with high ambient temperatures. The device features a fixed mounting technique and is designed for installation in distribution boards. The IP20 protection rating on the front side protects against contact with fingers and larger solid objects, although the device is not suitable for outdoor use or in damp environments. The operating element is designed as a door coupling rotary drive and is black, enabling clear visual indication of the switching state. The housing color is gray, and the device is lockable, ensuring safe disconnection and preventing unintended operation.
Applications
The OTDC16F2 is designed for use in industrial DC installations, particularly in areas where reliable circuit disconnection is required. It is frequently used in installations with high ambient temperatures, as it is specifically designed for such conditions. The OTDC switch series is suitable for currents from 16 A to 32 A and voltages up to 1000 V DC, with the OTDC16F2 covering the lower end of this voltage and current range. The mounting options allow for flexible integration into existing distribution board installations.
Functions and Equipment in Detail
The switch has two poles and is designed as a maintenance or repair switch, meaning it is intended for safe disconnection of the power supply during maintenance work. No auxiliary contacts (openers, closers, changeover contacts) are provided. The connection method in the main current circuit is via screw connection, ensuring a secure and mechanically stable connection. The locking function enables protection against unintended operation, which is particularly beneficial during maintenance work.
Technology Explained Simply
The technology of the OTDC16F2 is based on a mechanical disconnect switch operated by manual rotation. The power loss has been reduced by 50% compared to previous models, resulting in lower heat generation and thus contributing to a longer service life and higher reliability. The IEC approval guarantees compliance with international safety and performance standards. The nominal voltage of 1000 V DC and the nominal current of 25 A define the maximum operating parameters that can be safely and reliably disconnected.
Compatibility and Accessories
The device is designed for installation in distribution boards and can be combined with various accessories to adapt functionality to specific requirements. Available accessories include various handles such as the OHRS2 red lockable knob handle with a padlock (diameter 5 mm), the OHBS2AJ1E20 selector handle with shaft diameter 6 mm and IP65 protection rating, as well as extension shafts such as the OXS6X130 (length 130 mm, diameter 6 mm) or the OXS6X120. Additional handles such as the OHGS2AJ (gray, IP65) or the OHYS1PH (black, IP54, non-lockable) expand the selection. Combining these accessories allows individual adaptation to specific applications, for example, to improve operability or increase safety through locking.
Mounting and Installation
The OTDC16F2 is designed as an insert device for distribution board installation and is not intended for floor mounting or intermediate mounting. Dimensions are 52.5 mm (width), 89 mm (height), and 66.2 mm (depth), enabling compact placement in standard distribution board enclosures. Installation is carried out using the designated mounting options in the distribution board, with the screw connections for the main current circuit ensuring a secure electrical connection. The front side is equipped with IP20 protection rating, providing a protection class against contact with fingers and larger solid objects.
Operational Advantages
Operation of the OTDC16F2 is characterized by high reliability and low power loss. The 50% reduction in power loss leads to lower heat generation, extending the device's service life and increasing maintenance intervals. The locking function provides additional safety, especially during maintenance. The IEC approval and design for high ambient temperatures increase operational safety in demanding industrial environments. Compatibility with various accessories allows flexible adaptation to different operational requirements.