ABB 1SCA115666R1001, EAN: 6417019479859

ABB Automation OS100GJ12P load disconnector 3p 100A

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation OS100GJ12P load disconnector 3p 100A

Lieske Part No. 303609
Mfg Part No 1SCA115666R1001
EAN-Code 6417019479859
Manufacturer ABB
Here only 635,55 EUR
756,30 EUR incl. VAT

Further information for ABB Automation OS100GJ12P load disconnector 3p 100A

General
Max. rated operation voltage Ue AC1000
Rated permanent current Iu160
Rated operation power at AC-23, 400 V132
Rated short-time withstand current lcw5
Suitable for fusesOther
Number of poles3
Type of electrical connection of main circuitBolt connection
Cable entryOther
Type of control elementLong turning handle
Position control elementFront side
Degree of protection (IP), front sideIP20
Version as main switchyes
Version as safety switchyes
Equipped with connectorsyes
Suitable for busbar mountingyes
Motor drive optionalno
Motor drive integratedno
Version as emergency stop installationno
The ABB switch disconnector type OS100GJ12P is a manually operated switch for use in industrial installations. It serves as a main switch and safety switch and is designed for operation in electrical installations with alternating voltage. The design enables safe disconnection and switching operations in electrical circuits, where the switching function can be used for both general operation and safety requirements. The OS switch series from ABB is designed for demanding industrial applications, particularly in motor protection, but also suitable for transformers and other electrical loads.

Applications

The switch disconnector OS100GJ12P is intended for use in industrial electrical installations where safe and manual disconnection of the electrical circuit is required. It is frequently used in installations for controlling and protecting electrical loads, especially in motor drives, where safe disconnection is necessary in case of failure or for maintenance. The OS switch series is designed for use in installations with voltages up to 690 V AC, with the OS100GJ12P having a rated operational voltage of 1000 V AC. The switches are designed for use in environments with increased requirements for safety and reliability.

Functions and Equipment in Detail

The switch features an integrated fuse chamber, into which fuses of various designs can be installed. This allows adaptation to different fuse standards and increases flexibility during installation. The switches are equipped with a long rotary handle positioned at the front, enabling simple, manual operation. The connection type in the main current circuit is bolted connection, ensuring a secure and stable connection. The switches are suitable for busbar mounting, enabling flexible integration into existing switchgear installations.

Technology Explained Simply

The switch OS100GJ12P is rated for a nominal continuous current of 160 A, which describes the maximum current the switch can carry continuously. The rated operational power is 132 kW at 400 V and AC-23 operating mode, describing its performance under normal operating conditions. The rated short-time withstand current of 5 kA indicates the switch’s ability to withstand short-term current surges without damage. The IP20 protection rating on the front means the switch is protected against contact with fingers and against solid foreign objects, but not against water or dust. The switches are designed for indoor use, and the IP20 protection rating does not provide protection against environmental conditions such as humidity or dust.

Compatibility and Accessories

The switch OS100GJ12P can be combined with various accessories to extend functionality and operability. These include auxiliary contacts such as the OA1G10, suitable for front and bottom mounting, as well as various handles such as the OHB80J6 (black plastic handle, 80 mm) or OHY65J6 (red-yellow handle, 65 mm). Other options include the OHG65J6 (grey pistol grip, 65 mm, IP65) or OHB65J6E00S (black handle, 65 mm, IP65, marking 0 OFF-1 ON). These accessories allow adaptation to specific operating requirements and environmental conditions, especially where higher protection ratings are required.

Mounting and Installation

Mounting of the switch disconnector is carried out in the usual manner for switching devices in enclosures. The switches are suitable for busbar mounting, enabling flexible integration into existing installations. The bolted connections allow for secure and stable connection of cables. The front positioning of the operating element (long rotary handle) facilitates operation. The switches are modular in design, allowing the mechanism and poles to be positioned according to installation requirements, providing high flexibility during planning and installation.

Advantages in Operation

The switch disconnector OS100GJ12P offers high reliability and safety in operation. The integrated fuse chamber allows flexible adaptation to different fuse standards. The modular design and compatibility with various accessories increase flexibility during installation and use. The switches are designed for use in industrial installations where safe and manual disconnection of the electrical circuit is required. Certifications according to IEC and UL/CSA guarantee compliance with international safety and quality standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/303609
qrcode für ABB Automation OS100GJ12P load disconnector 3p 100A