Further information for ABB Automation OT250E04CFP load switch 4p 250A with handle
General
Number of switches
1
Max. rated operation voltage Ue AC
1000
Rated operating voltage
1000
Rated permanent current at AC-23, 400 V
250
Rated permanent current at AC-21, 400 V
250
Rated short-time withstand current lcw
8
Rated operation power at AC-23, 400 V
140
Switching power at 400 V
140
Number of poles
4
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
Device construction
Built-in device plug-in technique
Colour control element
Black
Type of electrical connection of main circuit
Screw connection
Degree of protection (IP), front side
IP20
Degree of protection (NEMA)
1
Colour housing
Grey
Depth
160
Height
150
Material housing
Plastic
Width
205
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
ABB Load Transfer Switch Type OT250E04CFP is a manually operated switch for use in industrial and commercial electrical installations. It is designed as an insert device using plug-in technology and serves for the safe switching of electrical loads. The switch is available as a main switch or as a maintenance or repair switch, but is not designed as a safety switch or emergency stop device. The switch has a pole count of 4 and is rated for an operating voltage of 1000 V AC. At an operating voltage of 400 V, the rated continuous current is 250 A, with the switching power also amounting to 140 kW. The rated short-time withstand current is 8 kA, indicating the device's capability to handle short-term overloads under operating conditions.
Applications
The load transfer switch is suitable for use in distributors and for front mounting with 4-hole mounting. It is not intended for central mounting or intermediate installation. The device design allows for flexible integration into existing control systems. Due to the maximum operating voltage of 1000 V AC and the high current capacity of 250 A at 400 V, it is suitable for medium- to high-performance applications in industry, machine building, or power supply. The protection rating IP20 (front side) and NEMA 1 indicate use in indoor environments where no special requirements for dust or splash water protection apply.
Functions and Equipment in Detail
The switch features a black operating element intended for manual operation. The connection type in the main current circuit is via screw connection, with connection terminals suitable for cable cross-sections of 25 to 120 mm² (Al/Cu). The housing color is gray, and the housing is made of plastic. The depth is 160 mm, the height 150 mm, and the width 205 mm. The switch is lockable, providing additional safety during maintenance work.
Technology Explained Simply
The designation OT250E04CFP describes the technical features: OT stands for load transfer switch, 250 for the rated current in amperes, E for the design, 04 for the pole count (4-pole), C for the switching type (open switching I-0-II), and FP for the design with handle and shaft. Open switching means that the switch switches between two positions (e.g., supply 1 and supply 2), with the circuit interrupted during switching. This is typical for applications where safe disconnection of the load is required. The integrated locking mechanism enables secure blocking of the operation to prevent unintended switching operations.
Compatibility and Accessories
Various accessories are available for this load transfer switch, extending its functionality. These include auxiliary contacts such as OA3G01 (1 NO) or OA3G01AU (with gold plating), which can be used for additional control or signaling tasks. Connection terminals such as OZXB2, OZXB8, or OZXB9 are available for different cable cross-sections and ensure secure connections. Connection bridges such as OTZC13 or OTZC14 allow connection of poles. Cable connection covers such as OTS250G1S/3 or OTS250G1L/3 provide mechanical protection and better organization in the enclosure. Combining it with an intelligent control unit enables use as an ATS (Automatic Transfer Switch), allowing automatic switching.
Mounting and Installation
The load transfer switch is designed for installation in distributors and can be mounted on the front panel using 4-hole mounting. The plug-in technology allows for easy installation and removal. The dimensions (205 mm width, 150 mm height, 160 mm depth) are suitable for standard enclosures. The connection terminals are designed for screw connection, with maximum cable cross-sections varying depending on the accessory. The locking function supports safe installation and maintenance, as the switch can be locked during installation or maintenance.
Advantages in Operation
The switch offers high operational safety due to the integrated locking mechanism and robust construction. The high current and voltage withstand capability enables use in demanding industrial environments. The plug-in technology and availability of accessories such as auxiliary contacts or terminal covers increase flexibility in adapting to specific requirements. The switching type I-0-II ensures safe disconnection of the load, which is important for maintenance work and emergency situations. The certifications according to IEC and UL confirm compliance with international safety standards.