ABB 1SCA106405R1001, EAN: 6417019402024

ABB Automation OT400E04CLP load switch 4-pole 400 A

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation OT400E04CLP load switch 4-pole 400 A

Lieske Part No. 324525
Mfg Part No 1SCA106405R1001
EAN-Code 6417019402024
Manufacturer ABB
Here only 4.233,20 EUR
5.037,51 EUR incl. VAT

Further information for ABB Automation OT400E04CLP load switch 4-pole 400 A

General
Number of switches1
Max. rated operation voltage Ue AC1000
Rated operating voltage1000
Rated permanent current at AC-23, 400 V400
Rated permanent current at AC-21, 400 V400
Rated short-time withstand current lcw15
Rated operation power at AC-23, 400 V220
Switching power at 400 V220
Number of poles4
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact0
Device constructionBuilt-in device plug-in technique
Colour control elementBlack
Type of electrical connection of main circuitScrew connection
Degree of protection (IP), front sideIP20
Degree of protection (NEMA)1
Colour housingGrey
Depth203
Height185
Material housingPlastic
Width265
Version as main switchyes
Version as maintenance-/service switchyes
Version as safety switchno
Version as emergency stop installationno
Version as reversing switchno
Motor drive optionalno
Motor drive integratedno
Voltage release optionalno
Suitable for front mounting 4-holeyes
Suitable for front mounting centreno
Suitable for distribution board installationyes
Suitable for intermediate mountingno
Interlockableyes
ABB Load Transfer Switch Type OT400E04CLP is a manually operated, 4-pole switch for use in industrial and commercial electrical installations. It is designed as a main switch and as a maintenance or repair switch, but does not serve as a safety switch or emergency stop device. The switching function is performed in the configuration closed transfer (I-I+II-II), ensuring that the circuit remains uninterrupted during the switching process. The switch has a rated operational voltage of 1000 V AC and a rated continuous current of 400 A at 400 V AC (AC-23 and AC-21). The switching capacity is 220 kVA at 400 V, making it suitable for applications with high loads. The degree of protection on the front side is IP20, providing protection against contact with fingers and against solid foreign objects larger than 12.5 mm. The NEMA protection class is 1, indicating suitability for indoor use without special environmental conditions. The device is designed as an insert-mounted component using plug-in technology and can be installed either for front mounting with 4-hole mounting or for installation in distribution boards. Dimensions are 265 mm (width) × 185 mm (height) × 203 mm (depth); the housing is made of plastic in grey colour, and the operating element is black. The connection type in the main current circuit is screw connection. The switch is lockable, enabling secure positioning and preventing unintended operation.

Applications

The OT400E04CLP load transfer switch is suitable for use in industrial installations where manual switching between two power sources is required, for example during maintenance or repair of electrical systems. The closed transfer (I-I+II-II) ensures that the load remains powered throughout the switching process, which is crucial for continuous processes. The high rated voltage and current make it suitable for applications with high power demands. Certifications according to IEC and UL allow use in various markets and regions.

Functions and Equipment in Detail

The switch is designed for operation within a voltage range up to 1000 V AC and can handle loads up to 400 A continuously. The rated short-time withstand current is 15 kA, indicating the device’s ability to safely handle short-term current surges. Its design as a main switch and maintenance switch allows flexible use in various system configurations. The device is not intended for use as a reversing switch. Operation is manual via a handle and shaft, which are supplied as standard. The locking function ensures the switch can be fixed in the desired position to prevent accidental operation.

Technology Explained Simply

The closed transfer (I-I+II-II) means the switch moves from position I (first power source) through an intermediate position (I+II) to position II (second power source), while the load remains continuously powered throughout the process. This is particularly important in installations where interruption of power supply is not acceptable. The protection class IP20 protects against contact with fingers and larger foreign objects, but is not suitable for outdoor or damp environments. The plug-in technology enables easy installation in distribution boards and quick maintenance. The screw connection type provides a secure and mechanically stable connection for main conductors.

Compatibility and Accessories

The switch can be combined with various accessories to extend its functionality. These include, for example, extension shafts such as OXP12X325 (325 mm) or OXP12X535 (535 mm), which improve accessibility of the operating element. Terminal sets such as OZXB4 or OZXB3 are suitable for cable cross-sections of 2x70–185 mm² and enhance connection reliability. Auxiliary contacts such as OA1G10AU or OA3G01AU can be added for signal processing or controlling external devices. Cable connection covers such as OTS400G1L/4 or OTS400G1S/3 protect the terminal connections from mechanical damage and contamination. Additionally, contact bridges such as OTZC23 or OTZC24 can be used to connect poles. Combining the switch with an intelligent control unit enables use as an ATS (Automatic Transfer Switch), allowing automatic switching between two power sources.

Mounting and Installation

The load transfer switch is intended for installation in distribution boards and can be mounted on the front plate using the 4-hole mounting. The plug-in technology allows for easy installation and maintenance. Connections are made via screw terminals, with cable cross-sections selected according to technical specifications. The locking function should be considered during installation to ensure the switch can be securely fixed in the desired position. Installation is intended for indoor use, as the IP20 protection class does not offer protection against moisture or dust.

Operational Advantages

The switch offers high operational safety due to integrated protection features and lockable operation. The closed transfer ensures continuous power supply, which is essential for critical installations. The compact design and plug-in technology enable efficient use of space in distribution boards. The high rated voltage and current make it suitable for demanding industrial applications. The availability of accessories allows individual adaptation to specific requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/324525
qrcode für ABB Automation OT400E04CLP load switch 4-pole 400 A