Further information for ABB Automation OT40F3C surge relay 1SCA104913R1001
General
Number of switches
1
Max. rated operation voltage Ue AC
750
Rated operating voltage
750
Rated permanent current at AC-23, 400 V
23
Rated permanent current at AC-21, 400 V
40
Rated short-time withstand current lcw
0.5
Rated operation power at AC-23, 400 V
11
Switching power at 400 V
11
Number of poles
3
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
Device construction
Built-in device plug-in technique
Colour control element
Black
Type of electrical connection of main circuit
Screw connection
Degree of protection (IP), front side
IP20
Degree of protection (NEMA)
1
Colour housing
Grey
Depth
68
Height
68
Material housing
Plastic
Width
70
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
The ABB power switch OT40F3C, manufacturer's number 1SCA104913R1001, is a manually operated load switch for use in electrical distributions and installations. It serves as a main switch and as a maintenance or repair switch, but is not designed as a safety switch or emergency stop device. The switch type enables safe disconnection of circuits during operation, particularly for maintenance work, and is intended for installation in distribution boxes. The device is designed as an insert component using plug-in technology, allowing it to be mounted in standard distribution boxes with front mounting 4-hole. The housing color is gray, the operating element is black, and the housing is made of plastic. The degree of protection on the front side is IP20, providing protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter. The NEMA protection class is 1, indicating use in indoor environments without special environmental conditions.
Applications
The OT40F3C is suitable for use in industrial and commercial electrical installations where manual power disconnection is required. It is commonly used in distributions for machines, systems, or electrical devices where safe disconnection is necessary for maintenance or repair work. The maximum rated operating voltage is 750 V AC, with the switch designed for operating voltages up to 690 V AC. The rated continuous currents are 40 A (AC-21, 400 V) and 23 A (AC-23, 400 V), making it suitable for applications with medium to high loads. The switching capacity at 400 V is 11 kW, reflecting the switch's performance under real operating conditions.
Functions and Equipment in Detail
The switch has a pole count of 3, making it suitable for three-phase AC systems. The connection method in the main current circuit is via screw connection, ensuring a secure and reliable connection. The device is lockable, preventing unintentional operation. This is particularly important in safety-critical systems, where disconnection must not occur due to carelessness or accidental contact. The design as a main switch and maintenance switch enables clear disconnection of power supply, and the switch type is not intended for use as a reversing switch.
Technology Explained Simply
The rated short-time withstand current (Icw) is 0.5 kA, indicating the switch's ability to withstand a short-duration current surge without damage. This is important during short-circuit events to ensure the safety of the system and its operation. The switches are designed for use in distributors and are not suitable for intermediate mounting. The compact design with dimensions 70 mm (width), 68 mm (height), and 68 mm (depth) allows for efficient space utilization in distribution enclosures. The integrated fuse functions ensure stable and safe operation, even under load.
Compatibility and Accessories
Various accessories are available for the OT40F3C to extend its functionality. These include extension shafts such as OXP6X150 (150 mm) or OXP6X265 (265 mm), enabling operation from a greater distance. Additionally, handle knobs are available, such as OHBS2/1 (black, lockable with padlock) or OHRS2 (red, lockable, diameter 5 mm), ensuring secure and identifiable operation. The accessories are specifically developed for the OT40F3C series and allow adaptation to specific operational requirements.
Mounting and Installation
Mounting is performed in standard distribution boxes with front mounting 4-hole. The device is intended for installation in distributors, with plug-in technology enabling simple and secure installation. The screw connections in the main current circuit require no additional tools for connection, but the connection terminals must be securely and permanently fixed. The locking function can be activated during installation to prevent unintended operation.
Advantages in Operation
The OT40F3C provides reliable and safe power disconnection in industrial installations. The integrated locking and high switching capacity ensure stable operation. Compatibility with various accessories allows flexible adaptation to different operating conditions. IEC and UL approvals confirm compliance with international safety and quality standards, enabling use in various markets. The compact design and plug-in technology simplify installation and maintenance in the distribution box.