ABB 1SCA022845R8370, EAN: 6417019296623

ABB Automation OTM250E3CM24D load switch 3-pole 250A

Installation > Securing material > NH fuses and accessories

ABB Automation OTM250E3CM24D load switch 3-pole 250A

Lieske Part No. 1340371
Mfg Part No 1SCA022845R8370
EAN-Code 6417019296623
Manufacturer ABB
Here only 3.800,25 EUR
4.522,30 EUR incl. VAT

Further information for ABB Automation OTM250E3CM24D load switch 3-pole 250A

General
Number of switches1
Max. rated operation voltage Ue AC1000
Rated operating voltage1000
Rated permanent current at AC-23, 400 V250
Rated permanent current at AC-21, 400 V250
Rated short-time withstand current lcw8
Rated operation power at AC-23, 400 V140
Switching power at 400 V140
Number of poles3
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact0
Device constructionBuilt-in device plug-in technique
Colour control elementBlack
Type of control elementLong turning handle
Type of electrical connection of main circuitScrew connection
Degree of protection (IP), front sideIP20
Degree of protection (NEMA)1
Colour housingGrey
Depth197
Height150
Material housingPlastic
Width273
Version as main switchyes
Version as maintenance-/service switchyes
Version as safety switchno
Version as emergency stop installationno
Version as reversing switchno
Motor drive optionalno
Motor drive integratedyes
Voltage release optionalno
Suitable for front mounting 4-holeyes
Suitable for front mounting centreno
Suitable for distribution board installationyes
Suitable for intermediate mountingno
Interlockableyes
Motor-operated load changeover switches meet the device standards DIN EN 60947-3 and DIN EN 60947-6-1. The switches have an open switch (I-0-II) and are suitable for use as motor-operated mains changeover switches. The switches can also be used in the AC and DC range. The switches can be mounted horizontally, vertically and flat. Depending on the type, the control voltage of the motor is 240 V DC, 110 V-240 V AC / DC, 24 V DC, 48 V DC, 110 V-125 V AC / DC and 220 V-240 V AC. The motor drive is controlled via a button or a central control center. The supplied handle for the EMERGENCY operation can optionally be locked in the OFF position. Remote control is prevented by mounting the handle or by mounting a lock. As accessories, ABB offers black handles for emergency operation, auxiliary contacts, fourth poles, N and PE terminals, terminal covers, connection terminals and much more.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1340371
qrcode für ABB Automation OTM250E3CM24D load switch 3-pole 250A