ABB 1SCA022775R7150, EAN: 6417019252469

ABB Automation OT315E04CP load switch 4-pole

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation OT315E04CP load switch 4-pole

Lieske Part No. 1324638
Mfg Part No 1SCA022775R7150
EAN-Code 6417019252469
Manufacturer ABB
Here only 1.686,25 EUR
2.006,64 EUR incl. VAT

Further information for ABB Automation OT315E04CP load switch 4-pole

General
Number of switches1
Max. rated operation voltage Ue AC1000
Rated operating voltage1000
Rated permanent current at AC-23, 400 V315
Rated permanent current at AC-21, 400 V315
Rated short-time withstand current lcw8
Rated operation power at AC-23, 400 V160
Switching power at 400 V160
Number of poles4
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact0
Device constructionBuilt-in device plug-in technique
Colour control elementBlack
Type of electrical connection of main circuitScrew connection
Degree of protection (IP), front sideIP20
Degree of protection (NEMA)1
Colour housingGrey
Depth203
Height185
Material housingPlastic
Width265
Version as main switchyes
Version as maintenance-/service switchyes
Version as safety switchno
Version as emergency stop installationno
Version as reversing switchno
Motor drive optionalno
Motor drive integratedno
Voltage release optionalno
Suitable for front mounting 4-holeyes
Suitable for front mounting centreno
Suitable for distribution board installationyes
Suitable for intermediate mountingno
Interlockableyes
The ABB load switch type OT315E04CP is a manually operated, 4-pole switch designed for use in industrial installations. It is used for the safe disconnection and switching of electrical loads during operation and is particularly employed in switchgear, distributors, or machine control systems. The design as a main switch and as a maintenance and repair switch enables flexible use in various application scenarios. The switch is rated for an operating voltage of 1000 V AC and has a rated continuous current of 315 A at 400 V AC (AC-23 and AC-21). The switching capacity is 160 kVA at 400 V, making it suitable for medium to high loads.

Applications

The load switch is intended for use in industrial electrical installations, particularly in areas where manual disconnection or switching of circuits is required. It is suitable for installation in distributors and front mounting with 4-hole mounting. The protection rating IP20 (front side) and NEMA 1 make it suitable for indoor use where no special environmental conditions such as moisture or dust prevail. The lockable operating element allows for secure positioning and prevents unintentional operation.

Functions and Equipment in Detail

The switch features an open switching configuration (I-0-II), meaning the circuit is completely disconnected in the center position (0). This is particularly important for maintenance and repair work, as it ensures safe disconnection. Operation is manual via an operating element, which is black in color. The main circuit connection is via screw connection, with connection terminals suitable for cross-sections up to 240 mm². The housing color is gray, and the housing is made of plastic. Dimensions are 265 mm (width), 185 mm (height), and 203 mm (depth).

Technology Explained Simply

The rated short-time withstand current of 8 kA indicates that the switch can safely interrupt short-term current surges in the event of a fault. The switching capacity of 160 kVA at 400 V AC is a measure of the maximum power the switch can safely switch. The design as an insert device with plug-in technology enables easy installation in standard distributor boxes. The integrated fuse function ensures safe operation, especially for loads requiring high current.

Compatibility and Accessories

The load switch can be combined with various accessories to adapt functionality to specific requirements. These include, for example, connection terminals for cross-sections from 95 to 240 mm², extension shafts such as OXP12X535 (535 mm) or OXP12X395 (395 mm), and pistol grips such as OHB95J12E311. Additionally, auxiliary contacts such as OA3G01AU with gold plating are available for additional signals or control functions. Cable connection covers such as OTS400G1L/3 or OTS400G1S/3 serve to improve shielding and safety of the connections.

Mounting and Installation

Mounting is done either by front mounting with 4-hole mounting or in a distributor. The plug-in technology enables quick and secure installation. The locking of the operating element can be used as needed to fix the switch in a specific position. The connection terminals are designed for screw connection, ensuring a secure and reliable connection.

Advantages in Operation

The load switch offers high operational safety due to the integrated fuse functions and the clear disconnection in the center position. The compact design enables efficient space utilization in switchgear. The availability of various accessories allows adaptation to specific requirements, such as longer operating shafts for hard-to-reach positions or additional auxiliary contacts for control tasks. The certifications according to IEC and UL/CSA guarantee compliance with international safety standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1324638
qrcode für ABB Automation OT315E04CP load switch 4-pole