ABB 1SCA022771R8680, EAN: 6417019251967

ABB Automation OT400E04CP load transfer switch 4-pole

Industrial Material > Automation > Frequency converter, soft starter

ABB Automation OT400E04CP load transfer switch 4-pole

Lieske Part No. 1324433
Mfg Part No 1SCA022771R8680
EAN-Code 6417019251967
Manufacturer ABB
Here only 2.140,35 EUR
2.547,02 EUR incl. VAT

Further information for ABB Automation OT400E04CP load transfer switch 4-pole

General
Number of switches1
Max. rated operation voltage Ue AC1000
Rated operating voltage1000
Rated permanent current at AC-23, 400 V400
Rated permanent current at AC-21, 400 V400
Rated short-time withstand current lcw15
Rated operation power at AC-23, 400 V220
Switching power at 400 V220
Number of poles4
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact0
Device constructionBuilt-in device plug-in technique
Colour control elementBlack
Type of electrical connection of main circuitScrew connection
Degree of protection (IP), front sideIP20
Degree of protection (NEMA)1
Colour housingGrey
Depth203
Height185
Material housingPlastic
Width265
Version as main switchyes
Version as maintenance-/service switchyes
Version as safety switchno
Version as emergency stop installationno
Version as reversing switchno
Motor drive optionalno
Motor drive integratedno
Voltage release optionalno
Suitable for front mounting 4-holeyes
Suitable for front mounting centreno
Suitable for distribution board installationyes
Suitable for intermediate mountingno
Interlockableyes
The ABB load switch type OT400E04CP is a manually operated, 4-pole switch for use in industrial electrical installations. It is designed for safe switching of electrical loads and is intended for operation in distributors and enclosures. The switch is available as a main switch as well as for maintenance and repair purposes, but is not designed as a safety switch or emergency stop device. The switch has a rated operating voltage of 1000 V AC and a rated continuous current of 400 A at 400 V AC (AC-23 and AC-21). The switching capacity is 220 kVA at 400 V, making it suitable for medium to high loads. The device is designed as an insert device with plug-in technology, suitable for installation in distributors or front mounting with a 4-hole mounting system. The front side has a protection rating of IP20, providing protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter. The enclosure colour is grey, the operating element is black, and the enclosure is made of plastic. Dimensions are 265 mm (width), 185 mm (height), and 203 mm (depth). The switch is lockable, preventing unintended operation and increasing safety during operation. The connection type in the main circuit is via screw connection.

Applications

The load switch is designed for use in industrial plants where manual switching of electrical loads is required. It is suitable for operating motors, pumps, heaters, or other electrical consumers that are not operated via automatic control. The high rated capacity and robust construction make it particularly suitable for applications in the manufacturing industry, power supply, or machine building. The ABB switch series offers both open switching (I-0-II) and closed switching (I-I+II-II), with the OT400E04CP supporting open switching. Certifications according to IEC and UL allow use in various international markets.

Functions and Equipment in Detail

The switch is designed as an insert device and can be mounted in distributors or enclosures. The plug-in technology facilitates replacement and maintenance. Front mounting is done via a 4-hole mounting system, enabling universal installation in standard distributor fronts. The locking function ensures the switch can only be operated in specific positions, increasing safety during operation. The screw connections in the main circuit provide a secure and reliable connection for electrical conductors. The IP20 protection rating protects against contact with fingers and larger foreign objects, but is not suitable for outdoor use or in damp environments.

Technology Explained Simply

The load switch OT400E04CP is a mechanical switch that interrupts or restores power supply to an electrical load through manual operation (e.g., with a handle). The 4-pole design means all phases and the neutral conductor (in 4-wire systems) are switched simultaneously, ensuring safe isolation of the load. The rating for 400 A at 400 V AC means it can continuously switch loads with a current up to 400 amperes without overheating or failing. The switching capacity of 220 kVA indicates the maximum power the switch can safely switch during a single operation. The rated short-time withstand current of 15 kA describes the maximum current the switch can withstand for a short period (a few seconds) without damage. This is important for protection against short-circuit currents.

Compatibility and Accessories

The switch can be combined with various accessories to extend functionality and safety. These include, for example, extension shafts such as OXP12X535 (535 mm) or OXP12X395 (395 mm), which improve accessibility of the operating element. Connection terminals such as the terminal set OZXB3 (for 70–185 mm²) or the connection terminal OZXB8 (for 95–185 mm²) provide secure connections for different cable cross-sections. Connection bridges such as OTZC24 or contact bridges such as OTZC23 can be used to extend switching functions. For additional safety and signalling, auxiliary contacts such as OA1G10 (1S) or OA3G01 (1Ö) are available. Cable connection covers such as OTS400G1S/4 or OTS400G1L/4 protect the connection points from mechanical damage and contamination. The accessories are specifically developed for the ABB switch series and ensure safe and compatible installation.

Installation and Mounting

Mounting is done in a distributor or enclosure, with plug-in technology enabling easy installation. Front mounting is done via the 4-hole mounting system, which is provided in many standard distributor fronts. The screw connections in the main circuit must be connected to the corresponding cables, ensuring correct polarity and compliance with maximum cable cross-sections (according to the used terminals). The locking function can be optionally used to fix the switch in specific positions. Installation should be carried out by qualified specialists to ensure safety and functionality.

Advantages in Operation

The load switch OT400E04CP offers high reliability and safety in operation. The robust construction and high rated capacity make it suitable for demanding industrial applications. The plug-in technology enables quick replacement and easy maintenance. The locking function increases safety, especially in plants where unintended operation must be prevented. Compatibility with a wide range of accessories allows individual adaptation to specific requirements. Certifications according to IEC and UL facilitate use in international markets. The IP20 protection rating is sufficient for use in enclosed enclosures where no direct exposure to water or dust is expected.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1324433
qrcode für ABB Automation OT400E04CP load transfer switch 4-pole