Further information for ABB Automation 1SCA022734R5980 disconnect switch OT16ETMM3TE
General
Number of switches
1
Max. rated operation voltage Ue AC
750
Rated operating voltage
750
Rated permanent current Iu
40
Rated permanent current at AC-23, 400 V
16
Rated permanent current at AC-21, 400 V
32
Rated short-time withstand current lcw
0.5
Rated operation power at AC-23, 400 V
7.5
Switching power at 400 V
7.5
Number of poles
3
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
1
Number of auxiliary contacts as change-over contact
0
Device construction
Complete device in housing
Colour control element
Black
Type of control element
Turn button
Type of electrical connection of main circuit
Screw connection
Degree of protection (IP), front side
IP65
Degree of protection (NEMA)
Other
Colour housing
Other
Depth
100
Height
200
Material housing
Steel
Width
150
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
Floor mounting
The ABB disconnect switch OT16ETMM3TE is an industrial safety switch in complete housing design, designed for use in electrical installations. It serves as a main switch, maintenance and repair switch, as well as a safety switch, and can also be used as an emergency stop device. The device features a 3-pole circuit with a black rotary knob as the operating element, which is lockable. The IP65 protection rating on the front ensures high protection against dust and water, enabling use in outdoor or damp environments. The housing is made of steel and is not intended for mounting in distribution boards or as an intermediate unit. Dimensions are 150 mm width, 200 mm height, and 100 mm depth.
Applications
This switch is suitable for applications in industry, maintenance and repair of electrical installations, and in environments with increased safety requirements. It is used to safely disconnect electrical equipment from the power supply, protecting personnel from electrical hazards. The design as an emergency stop device also makes it usable in emergency situations where immediate shutdown is required. The IP65 protection rating allows use in damp or dusty environments, for example in the food industry, metalworking, or outdoor applications.
Functions and Equipment in Detail
The disconnect switch OT16ETMM3TE features a screw connection for the main current circuit. It is equipped with an auxiliary contact functioning as a close contact, enabling integration into control and monitoring systems. The rated continuous current is 40 A, with a switching current of 16 A at AC-23 and 400 V, and 32 A at AC-21 and 400 V. The rated operating voltage is 750 V AC, and the switching power at 400 V is 7.5 kW. The rated short-time withstand current is 0.5 kA, indicating the switch’s ability to withstand short-term loads under fault conditions. The device is not equipped with a motor drive or voltage release.
Technology Explained Simply
The IP65 protection rating means the device is dust-tight and protected against water jets from any angle, ensuring high reliability in demanding environments. The rotary knob allows for simple and safe operation, while the locking mechanism prevents accidental actuation. The 3-pole design ensures complete disconnection of all conductors in a three-phase AC system. The integrated auxiliary contact function as a close contact enables control of auxiliary functions, for example, signaling the switch status in a control system.
Compatibility and Accessories
Various accessories are available for this disconnect switch, extending its functionality. These include handles in different designs, such as red/yellow or black, improving visibility and operability. Lockable handles, which can be fitted with padlocks, are also available to secure the switch against unauthorized operation. Additionally, shafts such as OXP6x265 or OX6x155 are available, enabling connection to other switches or control elements. Auxiliary contacts like OA1L11 with 1 close contact and 1 open contact can be used to expand control functions.
Mounting and Installation
The switch is not designed for front mounting in 4-hole or central format and cannot be mounted in distribution boards or as an intermediate unit. Mounting is done via the designated fastening elements in the housing. The dimensions of 150 mm width, 200 mm height, and 100 mm depth must be considered during installation planning. Floor mounting is not intended.
Operational Advantages
The switch offers high safety due to the integrated locking mechanism and IP65 protection rating. Simple operation via the rotary knob and the ability to integrate auxiliary contacts facilitate integration into existing control systems. The rated values for current and power make it suitable for a wide range of industrial applications. The use of steel as the housing material ensures high mechanical stability and durability.