Further information for ABB Automation 1SCA022725R3190 OT250KUUR3AZ frequency converter
General
Number of switches
1
Max. rated operation voltage Ue AC
1000
Rated operating voltage
750
Rated permanent current Iu
250
Rated permanent current at AC-23, 400 V
250
Rated permanent current at AC-21, 400 V
250
Rated short-time withstand current lcw
8
Rated operation power at AC-23, 400 V
132
Switching power at 400 V
132
Number of poles
3
Number of auxiliary contacts as normally closed contact
1
Number of auxiliary contacts as normally open contact
2
Number of auxiliary contacts as change-over contact
0
Device construction
Complete device in housing
Colour control element
Red
Type of control element
Long turning handle
Type of electrical connection of main circuit
Bolt connection
Degree of protection (IP), front side
IP65
Degree of protection (NEMA)
Other
Colour housing
Other
Depth
230
Height
800
Material housing
Steel
Width
400
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
Floor mounting
The safety switch OT250KUUR3AZ from ABB is a complete device in housing, designed for use in industrial plants where safe electrical disconnection and operation are required. The device features an execution as main switch, maintenance/repair switch, safety switch, and as an emergency stop device. It is not designed as a reversing switch. The switch execution includes a single switch with 3 poles, rated for an operating voltage of 750 V (max. 1000 V for AC). The rated continuous current is 250 A, both for AC-23 and AC-21 at 400 V. The switching capacity at 400 V is 132 kW, which corresponds to the rated operational power at AC-23. The protection rating on the front side is IP65, meaning dust-tight and splash-proof, enabling use in outdoor or damp environments. The housing is made of steel and has dimensions of 800 mm (height), 400 mm (width), and 230 mm (depth). The operating element is a long red rotary handle, which is lockable. The connection type in the main current circuit is bolt connection.
Applications
The switch is suitable for applications in industrial automation, particularly where safe electrical disconnection is required during maintenance work, emergencies, or as part of safety procedures. The execution as an emergency stop device makes it an important component of safety concepts in production plants, machines, and systems with moving parts. The IP65 protection rating allows use in environments with increased humidity, dust exposure, or outdoors, with mechanical robustness ensured by the steel housing.
Functions and Equipment in Detail
The device features an integrated auxiliary contact block with one normally open contact and two normally closed contacts, enabling integration into control and monitoring systems. The auxiliary contacts are not configured as changeover contacts. The locking function allows secure fixation of the switch in one position to prevent unintended operation. The operating element is a long red rotary handle, providing clear visual identification. The connection type is bolt connection, ensuring a secure and mechanically stable connection.
Technology Explained Simply
The rated continuous current of 250 A at 400 V means the switch can continuously switch loads up to this current level without thermal overload. The switching capacity of 132 kW at 400 V corresponds to the maximum power the switch can safely switch at this voltage. The IP65 protection rating protects the device from dust and splashing water, making it suitable for industrial environments with high environmental demands. The locking function prevents unintended operation, which is especially important during maintenance work.
Compatibility and Accessories
Various accessories are available for this switch to extend its functionality. These include additional auxiliary contacts such as the OEA 28 module for auxiliary switch left, extension shafts such as OXP6X150 or OXP6X13, and alternative handles such as OHB80J6 (black plastic handle, 80 mm) or OHY80J6 (red-yellow, IP65, 80 mm). Mechanical interlocks such as OTZW10 or connection terminals such as OZXB9 (for cross-sections 95–240 mm²) can be used additionally. The 6 mm square shaft OXP6X430 (430 mm adjustable) allows adjustment of the operating length. Combination with a SweitchLine selector switch OTZW25 enables mechanical interlocking with other switches.
Mounting and Installation
The device is supplied as a complete unit in housing and is not suitable for front mounting (4-hole, central), distribution board installation, or intermediate mounting. Mounting is not for floor mounting. The dimensions (800 mm height, 400 mm width, 230 mm depth) must be considered for placement in enclosures or machine constructions.
Operational Advantages
The combination of high switching capacity, IP65 protection rating, and integrated auxiliary contacts makes the switch a robust solution for demanding industrial applications. The locking function increases safety during maintenance work. The clear identification via the red rotary handle supports quick recognition during operation. Compatibility with various accessories allows flexible adaptation to specific system requirements.