Further information for ABB Automation 1SCA022723R0570 OT200U30 load disconnect switch 3-pole 200A
General
Number of switches
1
Max. rated operation voltage Ue AC
1000
Rated operating voltage
1000
Rated permanent current Iu
200
Rated permanent current at AC-23, 400 V
250
Rated short-time withstand current lcw
8
Rated operation power at AC-23, 400 V
110
Switching power at 400 V
110
Number of poles
3
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
Device construction
Complete device in housing
Type of electrical connection of main circuit
Bolt connection
Degree of protection (IP), front side
IP00
Degree of protection (NEMA)
Other
Colour housing
Grey
Depth
82.5
Height
170
Material housing
Plastic
Width
169.5
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Interlockable
Floor mounting
The ABB switch disconnector OT200U30 is a manually operated, compact device for current disconnection in industrial installations. It is designed as a main switch and as a maintenance or repair switch, but does not have the function of a safety switch, emergency stop device, or reversing switch. The device has a pole count of 3 and is designed for a rated operational voltage of 1000 V AC. The rated continuous current is 200 A, with a rated continuous current of 250 A achieved at an operating voltage of 400 V and load type AC-23. The switching capacity at 400 V is 110 kVA, highlighting the switch's performance in typical industrial applications. The rated short-time withstand current Icw is 8 kA, demonstrating the device's ability to handle short-term overloads under specific conditions.
Switch disconnector of the OT series from ABB is characterised by high flexibility in mounting orientation, allowing use in various distribution systems. The device is intended for installation in distribution boards and is delivered as a complete unit in its housing. The connection method in the main circuit is via bolted connection, ensuring a secure and robust connection. The housing is made of plastic and is grey in colour, with dimensions of 169.5 mm (width), 170 mm (height), and 82.5 mm (depth). The protection rating on the front side is IP00, meaning the device offers no protection against dust or water and is therefore not suitable for outdoor use or in damp environments. The NEMA protection rating is specified as other, without a specific classification.
Functions and equipment in detail include the design as a main switch and maintenance switch, with no auxiliary contacts (openers, closers, changeover contacts) integrated. There is no integrated or optional motor drive or voltage release function. The device is not lockable and is not designed for front mounting (4-hole or central). Floor mounting is also not intended.
Technology explained simply shows that the switch primarily serves to disconnect electrical loads to enable safe maintenance or repair. Rated values such as continuous current and switching capacity are crucial for selecting the correct device in relation to the load to be switched. Short-time current withstand capability is important for safety during transient overloads. The use of bolted connections ensures a mechanically stable and electrically reliable connection. The IP00 protection rating means the device is not protected against external influences such as dust or moisture and should therefore only be used in enclosed, dry distribution boards.
Compatibility and accessories include a variety of optional components that can extend functionality. These include different handles such as the black plastic handle OHB80J6 (80 mm) or the red-yellow handle OHY65J6 (65 mm), as well as the grey pistol grip OHG65J6 (65 mm) with IP65 protection rating. For operation over greater distances or in hard-to-reach areas, various shafts are available, such as the adjustable shaft OXP6X430 (430 mm, adjustable 400–455 mm) or the extension shaft OESEZS30 (360 mm). Cable connection covers such as OTS250G1L/4 or OTS250G1S/4, as well as auxiliary contacts such as OA1G10 or OA3G01, can be mounted additionally to enable additional signals or control functions. Electrical interlock switches such as OTZM4A offer the possibility to lock the switch in the OFF position, which can be useful in safety-critical applications.
Mounting and installation takes place in distribution boards, with the mounting orientation being freely selectable. Mounting is done via the housing, which is designed for installation in standard distribution boards. The bolted connections require appropriate tools for securing the cables. The dimensions of the device are designed to fit into standard distribution boxes. Operation is manual, with optional handles and shafts improving accessibility and operability.
Advantages in operation lie in the combination of high performance and compact design. The OT series enables flexible planning through freely selectable mounting orientation and a wide range of accessory components. The robust construction with bolted connections ensures a reliable electrical connection. Use as a main switch or maintenance switch makes the device versatile for industrial installations where safe current disconnection is required. The availability of accessories such as handles, shafts, and auxiliary contacts extends the range of applications and allows adaptation to specific requirements of the installation.