Further information for ABB Automation OS250D03 load disconnector 3p 250A without handle
General
Max. rated operation voltage Ue AC
1000
Rated permanent current Iu
250
Rated operation power at AC-23, 400 V
250
Conditioned rated short-circuit current Iq
100
Rated short-time withstand current lcw
8
Suitable for fuses
NH0
Number of poles
3
Type of electrical connection of main circuit
Bolt connection
Cable entry
Other
Type of control element
Long turning handle
Position control element
Left
Degree of protection (IP), front side
IP20
Version as main switch
Version as safety switch
Equipped with connectors
Suitable for busbar mounting
Motor drive optional
Motor drive integrated
Version as emergency stop installation
The ABB switch disconnector type OS250D03 is a manually operated switch for use in industrial electrical installations. It is designed as a main switch and safety switch, serving to safely disconnect electrical circuits. The design allows use in installations with a maximum rated operating voltage of 1000 V AC. The switch has a rated continuous current of 250 A and is designed for a rated operating power of 250 kW at 400 V AC (AC-23). The short-circuit withstand capability is specified with a conditional rated short-circuit current Iq of 100 kA and a rated short-time current withstand Icw of 8 kA. The number of poles is 3, making it suitable for three-phase installations. The main circuits are equipped with bolted connections, ensuring a secure mechanical connection to cables or busbars. The switches are designed for use with fuse inserts of type NH0, providing an integrated fuse chamber for accommodating fuses of various designs. The degree of protection is IP20 on the front, ensuring protection against contact with fingers and against solid foreign objects larger than 12.5 mm. The operating element is designed as a long rotary handle and is positioned on the left side of the device. An integrated or optional motor drive is not available. The switches are not designed as emergency stop devices.
Applications
The switch disconnector OS250D03 is designed for use in industrial installations, particularly for motor protection, but also for disconnecting transformers and other electrical loads. The modular design enables flexible adaptation to different installation requirements, allowing efficient planning and installation in various application scenarios. The switches are suitable for use in installations with voltages up to 690 V AC, with the maximum rated operating voltage being 1000 V AC. The integrated fuse chamber allows the use of various fuse standards, facilitating adaptation to national or international standards.
Functions and Equipment in Detail
The switch features an integrated fuse chamber designed for fuse inserts of type NH0. This enables safe protection of the circuit against overload and short-circuit. The design as a main switch and safety switch allows complete disconnection of the circuit, creating a safe working environment. Operation is manual via a long rotary handle positioned on the left side. The switches are suitable for busbar installation, allowing integration into vertical or horizontal switchgear. Connection is via bolted terminals, ensuring a stable and reliable electrical connection. The IP20 protection rating protects against contact with fingers and larger foreign objects, but is not suitable for outdoor use or in damp environments.
Technology Explained Simply
The rated continuous current of 250 A means the switch can carry a current of 250 amperes continuously without overheating or damage. The rated operating power of 250 kW at 400 V AC (AC-23) describes the maximum power the switch can safely switch at this voltage and load type (e.g., motor drive). The short-circuit withstand capability with Iq = 100 kA and Icw = 8 kA indicates the switch can safely withstand short-term current surges up to 100 kA and a short-time current withstand of 8 kA for 1 second. The IP20 protection rating means the switch is protected against contact with fingers and larger foreign objects, but not against water or dust. The integrated fuse chamber allows installation of fuses that disconnect the circuit in case of overload or short-circuit.
Compatibility and Accessories
The switch is compatible with various accessories that extend its functionality. These include extension shafts such as OXP6X13 (130 mm) or OESEZS30 (360 mm with 6 mm square drive), which improve accessibility of the operating element. Auxiliary switches such as OA3G01 (1NC) can be used for signal transmission or controlling auxiliary functions. Terminal covers such as OZXB3K or OTS250G1L protect the connection terminals from contact and contamination. Additionally, terminal sets such as OZXB5 or OZXB4K are available for different cable cross-sections. Fuses such as OFAF0H200 (NH0, 200 A, 500 V GG) or OFAA1gG125 (NH1, 125 A, 690 V gG) can be installed in the integrated fuse chamber. Handles such as OHB65J6E00S (black, 65 mm, IP65) offer an alternative operating option. The switches are designed for use with these accessories, allowing individual adaptation to specific applications.
Mounting and Installation
Mounting is done via bolted connections to the main circuits, with cables connected according to the specified cross-sections. The switches are suitable for busbar installation, enabling flexible integration into existing switchgear. The left-side positioning of the operating element requires consideration of accessibility during switchboard planning. The use of extension shafts or alternative handles can facilitate operation, especially for switches in elevated positions. The integrated fuse chamber requires selection of appropriate fuses matching the load requirements. Mounting is done without additional tools, although the bolted connections must be secured using suitable tools (e.g., wrench).
Advantages in Operation
The switch disconnector OS250D03 offers high reliability and safety in operation. The integrated fuse chamber enables simple and safe circuit protection. The modular design and compatibility with various accessories allow flexible adaptation to different requirements. The high short-circuit withstand capability and rating for 250 A continuous current make the switch suitable for demanding industrial applications. The IP20 protection rating ensures sufficient protection against contact, with indoor and dry environments recommended for use. The use of accessories such as extension shafts or auxiliary switches extends functionality and facilitates operation and maintenance.