Further information for ABB Automation OTE16A3M surge relay 1SCA022613R8710
General
Number of switches
1
Max. rated operation voltage Ue AC
750
Rated operating voltage
750
Rated permanent current Iu
40
Rated permanent current at AC-23, 400 V
16
Rated permanent current at AC-21, 400 V
32
Rated short-time withstand current lcw
0.5
Rated operation power at AC-23, 400 V
7.5
Switching power at 400 V
7.5
Number of poles
3
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
1
Number of auxiliary contacts as change-over contact
0
Device construction
Complete device in housing
Colour control element
Red
Type of control element
Turn button
Type of electrical connection of main circuit
Screw connection
Degree of protection (IP), front side
IP65
Degree of protection (NEMA)
Other
Colour housing
Other
Depth
85
Height
150
Material housing
Plastic
Width
130
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
Floor mounting
ABB surge switch type OTE16A3M, manufacturer number 1SCA022613R8710, is a compact, encapsulated safety device for secure power disconnection in industrial installations. The device is designed as a safety switch and serves simultaneously as a main switch, maintenance/repair switch, and emergency stop device. It features a 3-pole configuration and is designed for use in electrical installations with a rated operational voltage of 750 V AC. The switching capacity is 7.5 kW at 400 V, corresponding to the rated operational power under AC-23 conditions. The rated continuous current Iu is 40 A, with a specified current of 16 A at AC-23 and 400 V, and 32 A at AC-21 and 400 V. The rated short-time withstand current Icw is 0.5 kA, indicating the switch’s ability to withstand short-term overloads under defined conditions.
Applications
The switch is designed for use in industrial environments where secure and reliable power disconnection is required. It is particularly suitable for installations where maintenance, repairs, or emergency shutdowns are necessary. The design as an emergency stop device enables quick and unambiguous disconnection in emergencies. The IP65 protection rating on the front ensures high protection against dust and water, enabling use in outdoor or humid environments. The housing is made of plastic and is supplied as a complete unit in housing, resulting in an integrated and robust construction.
Functions and Equipment in Detail
The switch features a red-colored operating element in the form of a rotary knob, providing clear visual identification and easy operation. The locking function ensures the switch can be securely held in the off position, enhancing safety during maintenance work. An auxiliary contact as a make contact is integrated, allowing the switching state to be monitored or fed back into control systems. The connection type in the main current circuit is via screw connection, ensuring a secure and reliable connection.
Technology Explained Simply
The IP65 protection rating means the device is completely dust-tight and protected against water jets from any direction. This makes the switch suitable for use in harsh environments, such as those found in industry or outdoors. Rated values such as the rated continuous current and switching capacity are crucial for selecting the correct switch for a specific installation. The designation AC-23 refers to a specific switching condition according to IEC standards, where the switch is operated under load-switching conditions (e.g., for motor drives). The integrated locking mechanism and auxiliary contact enhance the functionality and safety of the device.
Compatibility and Accessories
The switch is part of the ABB series for safety switches and can be integrated into installations requiring IEC and UL approvals. The series includes various housing materials such as plastic, steel, stainless steel, and aluminum, with the current model featuring a plastic housing. The products are suitable for use in EMC-critical environments, with special variants available for electromagnetic interference.
Mounting and Installation
The device is supplied as a complete unit in housing and is not designed for front mounting (4-hole, central) or distribution board installation, intermediate mounting, or floor mounting. Installation is therefore carried out in a suitable enclosure or other mounting solution that meets mechanical and electrical requirements. Dimensions are 130 mm (width), 150 mm (height), and 85 mm (depth), which must be considered during planning of the mounting location.
Advantages in Operation
The switch offers clear and secure operation through the red-marked rotary knob element and integrated locking. The IP65 protection rating ensures high environmental resistance. The integrated auxiliary contact function enables simple status monitoring. The rated values are designed for typical industrial applications, with the switching capacity of 7.5 kW at 400 V being sufficient for many motor drives. The robust plastic construction and compact design facilitate integration into existing control systems.