General
Rated control supply voltage Us at AC 50HZ	60
Rated control supply voltage Us at AC 60HZ	60
Rated control supply voltage Us at DC	60
Voltage type for actuating	AC/DC
Rated operation current Ie at AC-1, 400 V	130
Rated operation current Ie at AC-3, 400 V	105
Rated operation power at AC-3, 400 V	45
Number of auxiliary contacts as normally open contact	1
Number of auxiliary contacts as normally closed contact	1
Type of electrical connection of main circuit	Screw connection
Number of normally closed contacts as main contact	0
Number of main contacts as normally open contact	3
Depth	116
Height	125.5
Operating voltage at AC 50 Hz	1000
Operating voltage at AC 60 Hz	1000
Width	82
Modular version

Contactors AF09 to AF96 from 4 to 45 kW AC-3 (400 V) represent the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 VDC to 24...500 VAC - without additional suppression elements required. This means that they can be used worldwide and only with limited variation. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexibly interchangeable coil connection terminals allow connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged onto the front and 2-pole auxiliary switches that can be mounted on the right and left. For front coil connection, an additional auxiliary switch block with 1NO+1NC and coil connections A1 and A2 is available up to AF65. All auxiliary break contacts are designed as mirror contacts in accordance with IEC60947-5-1 Appendix L. Additional accessories such as timing elements, wiring aids and locking elements, etc., complete the range.