General
Rated control supply voltage Us at DC	24
Voltage type for actuating	DC
Rated operation current Ie at AC-1, 400 V	45
Rated operation current Ie at AC-3, 400 V	26
Rated operation power at AC-3, 400 V	11
Rated operation power NEMA	11.1855
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as normally closed contact	0
Type of electrical connection of main circuit	Screw connection
Number of normally closed contacts as main contact	0
Number of main contacts as normally open contact	3
Depth	106
Height	86
Operating voltage at AC 50 Hz	690
Operating voltage at AC 60 Hz	690
Width	45
Modular version

The 3-pole AF26Z contactors are designed for switching power circuits with motors, slightly inductive or non-inductive loads. They have an electronic coil interface that can implement a very wide control voltage. This means that even large control voltage fluctuations can be handled. The contactors with coil code -30 enable direct control via =24V DC 250mA PLC outputs and require a very low holding power of only 1.7W. AFZ contactors can withstand short voltage dips and voltage drops (according to SEMI F47-0706). All subsequently attachable auxiliary break contacts are designed as mirror contacts in accordance with IEC60947-5-1 Appendix L. They also have built-in overvoltage protection and do not require any additional suppression elements. Other accessories such as timing elements, wiring aids and locking elements, etc., complete the range.