General
Rated control supply voltage Us at AC 50HZ	60
Rated control supply voltage Us at AC 60HZ	60
Rated control supply voltage Us at DC	60
Voltage type for actuating	AC/DC
Rated operation current Ie, 400 V	3
Connection type auxiliary circuit	Screw connection
Mounting method	DIN-rail/screw
Number of auxiliary contacts as normally closed contact	2
Number of auxiliary contacts as normally open contact	6
Number of auxiliary contacts as normally closed contact, delayed switching	0
Number of auxiliary contacts as normally open contact, leading	0
Number of auxiliary contacts as change-over contact	0
Depth	110.5
Height	86
Operating voltage at AC 50 Hz	690
Operating voltage at AC 60 Hz	690
Operating voltage at DC	6
Rated operation current	3
Rated switch current	4
Voltage type (operating voltage)	AC
Width	45
Interface
With LED indication
Manual operation

The 8-pole NFZ auxiliary contactors are used to switch auxiliary and control circuits (positively guided contacts available). They have an electronic coil interface that can implement a very wide control voltage. This means that even large control voltage fluctuations can be handled. The auxiliary contactors enable direct control via =24V DC 500mA PLC outputs and require a very low holding power of only 1.7W. NFZ auxiliary contactors can withstand short voltage dips and voltage drops (according to SEMI F47-0706) between 24...250 V 50/60 Hz. They have built-in overvoltage protection and do not require additional suppressors. A wide range of accessories is also available.