General
Rated permanent current Iu	0.63
Rated voltage	690
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz	100
Overload release current setting	0.63
Adjustment range undelayed short-circuit release	12.6
Type of electrical connection of main circuit	Screw connection
Device construction	Complete device in housing
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Number of poles	3
Position of connection for main current circuit	Front side
Type of control element	Turn button
Degree of protection (IP)	IP20
Power loss	4.5
Integrated earth fault protection
Suitable for DIN rail (top hat rail) mounting
DIN rail (top hat rail) mounting optional
With switched-off indicator
Complete device with protection unit
Motor drive integrated
Motor drive optional
With integrated under voltage release

Transformer circuit breaker MS132-T with thermal and electromagnetic protection represents the compact and powerful series with high short-circuit breaking capacity for transformer protection up to 25 A with a module width of 45 mm. With this device, the primary-side transformer rated current is thermally monitored by setting on the current scale. The short-circuit is triggered when 20 times the device rated current occurs. The temperature-compensated device has a rotary handle operation with a clear switch position indicator I/TRIP/0. In addition, MS132-T has a short-circuit indicator. The rotary handle can be directly locked in the 0 position using a padlock. Auxiliary, signal and short-circuit signaling contacts as well as undervoltage and shunt current releases can be installed without tools. 1-phase feed-in blocks up to 25 mm² and phase connectors support the wiring of 1-phase transformers.