ABB 1SAE231111R1431, EAN: 4013614518089

ABB Automation 1SAE231111R1431 heating contactor 3S/1Ö 12 V AC/DC

Installation > Modular devices / equipment installation > Heating contactor

ABB Automation 1SAE231111R1431 heating contactor 3S/1Ö 12 V AC/DC

Lieske Part No. 1101483
Mfg Part No 1SAE231111R1431
EAN-Code 4013614518089
Manufacturer ABB
Here only 97,85 EUR
116,44 EUR incl. VAT

Further information for ABB Automation 1SAE231111R1431 heating contactor 3S/1Ö 12 V AC/DC

General
Rated operating voltage400
Rated operation current25
Rated excitation voltage12
Voltage type (operating voltage)AC/DC
Voltage type (excitation voltage)AC/DC
Number of contacts as normally open contact3
Number of contacts as normally closed contact1
Built-in depth58
Degree of protection (IP)IP20
Width in number of modular spacings2
Slider for hand switchno
Additional equipment possibleyes
With day/night functionno
The ABB installation contactor ESB25-31N-14 is a 4-pole contactor for mounting in distribution boxes, designed for operation with a rated operating voltage of 400 V and a rated operating current of 25 A. It features an integrated coil circuit, enabling operation with both alternating and direct voltage – the rated control voltage is 12 V, supporting AC/DC voltage types. This design ensures the device operates completely hum-free and quietly during switching. The contactor is suitable for use in electrical installations in the field of heating technology, hot water preparation, pump and ventilation drive systems, as well as lighting systems. The contact configuration includes three normally open contacts and one normally closed contact, making it flexible for various switching functions. The mounting depth is 58 mm, and the device is designed for installation, complying with the mounting requirements for distribution boxes. The width corresponds to two module units, equivalent to a construction width of 36 mm. The protection rating IP20 provides protection against finger contact and solid foreign objects, but not against splashing water or dust – thus, it is intended for indoor use only. The devices comply with, among others, the household standard EN61095, making them suitable for use in residential and commercial buildings.

Installation contactor is the product type specified here. It is a device for electrical control of loads, particularly in heating and pump systems. The rated operating voltage of 400 V and the rated operating current of 25 A define the maximum operating parameters the device can safely and durably handle. The coil circuit enables use with AC and DC voltages, facilitating adaptation to various control systems. The protection rating IP20 describes the degree of protection against mechanical influences and foreign objects, but not against moisture – this is crucial for the installation position indoors. The construction width of 36 mm corresponds to two module units, ensuring compatibility with standard distribution boxes.

The device is designed for use in electrical installations controlling 3-phase loads. It can switch electric heaters, hot water heaters, motors for pumps, ventilation systems and other drives, as well as lighting systems. The integrated coil circuit ensures quiet and hum-free switching, which is particularly advantageous in residential and office buildings. The contact configuration with three normally open contacts and one normally closed contact offers flexibility for switching tasks. The mounting depth of 58 mm must be considered during distribution box planning to ensure correct installation. The installation design meets the requirements for mounting in distribution boxes and complies with the standard EN61095, which applies to household installations.

Accessories and compatibility include an optional auxiliary switch, which can be mounted on the left side, as well as sealing caps and a spacing piece. These components can be used additionally depending on the application to extend the functionality or protection of the device. The auxiliary switch EH04-11N (1NO/1NC) can, for example, be used for signal transmission or status indication. The sealing cap ESB-PLK24 serves to secure the device against unauthorized manipulation. The possibility to attach additional components increases the adaptability of the contactor to specific requirements.

Installation is carried out in standard distribution boxes, taking into account the mounting depth of 58 mm and the construction width of 36 mm (2 module units). The device is not equipped with a manual operation slider, meaning it is operated exclusively via electrical control. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments.

The operational safety and reliability of the contactor result from its construction with an integrated coil circuit, enabling hum-free switching. The contact configuration with three normally open contacts and one normally closed contact offers versatile applications in switching installations. Compliance with standard EN61095 ensures suitability for use in household and commercial installations. The possibility to integrate additional components such as auxiliary switches or sealing caps increases the functionality and adaptability of the device to specific requirements. The mounting depth of 58 mm and the construction width of 36 mm are critical for distribution box planning. The device is not equipped with a day/night function, meaning it does not offer automatic switching based on time of day or lighting conditions. Operation is exclusively via electrical control with 12 V AC/DC. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments.

Compatibility and accessories extend the functionality of the contactor. The auxiliary switch EH04-11N (1NO/1NC) can be mounted on the left side and is used, for example, for status indication or signal transmission. The sealing cap ESB-PLK24 provides the option to secure the device against unauthorized manipulation. The possibility to attach additional components increases adaptability to specific requirements. Compliance with standard EN61095 ensures suitability for use in household and commercial installations. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments.

Installation is carried out in standard distribution boxes, taking into account the mounting depth of 58 mm and the construction width of 36 mm (2 module units). The device is not equipped with a manual operation slider, meaning it is operated exclusively via electrical control. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments.

The operational safety and reliability of the contactor result from its construction with an integrated coil circuit, enabling hum-free switching. The contact configuration with three normally open contacts and one normally closed contact offers versatile applications in switching installations. Compliance with standard EN61095 ensures suitability for use in household and commercial installations. The possibility to integrate additional components such as auxiliary switches or sealing caps increases the functionality and adaptability of the device to specific requirements. The mounting depth of 58 mm and the construction width of 36 mm are critical for distribution box planning. The device is not equipped with a day/night function, meaning it does not offer automatic switching based on time of day or lighting conditions. Operation is exclusively via electrical control with 12 V AC/DC. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments.

Operational advantages lie in the quiet and hum-free switching function, achieved through the integrated coil circuit. The contact configuration with three normally open contacts and one normally closed contact offers flexibility for switching tasks. Compliance with standard EN61095 ensures suitability for use in household and commercial installations. The possibility to integrate additional components such as auxiliary switches or sealing caps increases the functionality and adaptability of the device to specific requirements. The mounting depth of 58 mm and the construction width of 36 mm are critical for distribution box planning. The device is not equipped with a day/night function, meaning it does not offer automatic switching based on time of day or lighting conditions. Operation is exclusively via electrical control with 12 V AC/DC. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments. The suitability for installation in distribution boxes is ensured by the installation design, which complies with the requirements of standard EN61095. The operating voltage of 400 V and the operating current of 25 A are the maximum values the device can safely handle. The coil voltage of 12 V AC/DC enables flexible integration into various control systems. The protection rating IP20 protects against finger contact and solid foreign objects, but not against moisture – therefore, use is exclusively intended for indoor environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1101483
qrcode für ABB Automation 1SAE231111R1431 heating contactor 3S/1Ö 12 V AC/DC