Further information for ABB Automation ESB25-04N-14 heating contactor 12 VAC/DC
General
Rated operating voltage
400
Rated operation current
25
Rated excitation voltage
12
Voltage type (operating voltage)
AC/DC
Voltage type (excitation voltage)
AC/DC
Number of contacts as normally open contact
0
Number of contacts as normally closed contact
4
Built-in depth
58
Degree of protection (IP)
IP20
Width in number of modular spacings
2
Slider for hand switch
Additional equipment possible
With day/night function
ABB Installation contactor ESB25-04N-14 is a 4-pole contactor for installation in distribution boxes and is used to control 3-phase loads up to 25 A. It features a rated operating voltage of 400 V and is designed for use in electrical installations controlling heating appliances, water heaters, pump motors, ventilation systems, and lighting systems. The integrated coil circuit enables operation with both alternating and direct current (AC/DC), ensuring the device operates without humming and quietly during switching. The control voltage is 12 V, supporting both AC and DC. The device is designed for installation and complies with household standard EN61095, making it particularly suitable for installation in distribution boards. The installation depth is 58 mm, and the width corresponds to two modular units (36 mm mounting width). The protection class IP20 protects against finger contact and solid foreign objects, but is not intended for outdoor use or in damp environments.
Applications
The contactor is intended for use in electrical installations in the field of heating and ventilation technology, pump control, and lighting technology. It is particularly suitable for applications requiring reliable and quiet switching functions, such as in residential buildings, commercial enterprises, or industrial installations with low noise requirements. The 4-pole design enables control of 3-phase loads, with contacts configured as 0 normally closed and 4 normally open. This makes it especially suitable for applications where the circuit must be interrupted upon actuation.
Functions and Equipment in Detail
The device features an integrated coil circuit enabling operation with both AC and DC voltage. This technology ensures the contactor produces no mechanical noise during switching, making it particularly suitable for applications in quiet environments. The rated operating current of 25 A allows control of loads with corresponding power. The contactor is not equipped with a manual override lever, meaning it operates exclusively via electrical actuation. The contact configuration with 4 normally open contacts (0S/4O) enables secure disconnection of circuits upon actuation.
Technology Explained Simply
The integrated coil circuit is a special circuit technology enabling the contactor coil to be operated with both alternating and direct current. This is particularly advantageous as it increases flexibility in control and eliminates the need for separate switching devices for AC and DC applications. The rated operating voltage of 400 V is typical for 3-phase networks in Europe and enables control of loads in industrial and commercial applications. The control voltage of 12 V is low and commonly used in low-voltage control systems to enhance safety.
Compatibility and Accessories
To extend functionality, additional components can be connected. As an accessory, a supplementary contact block EH04-11N (1NO/1NC) can be mounted on the left side, enabling additional switching functions. A sealing cap ESB-PLK24 is also available, providing protection against unauthorized manipulation. These accessories complement the product range and allow application-specific adaptation of the contactor.
Mounting and Installation
The contactor is designed for installation in standard distribution boxes and corresponds to a width of two modular units (36 mm). The installation depth of 58 mm must be considered during distribution board planning. Mounting is typically done via screw fastening in the distribution box, with electrical connections made at the designated terminals. Installation requires no special tools or additional components, as the device is standardized.
Advantages in Operation
The hum-free and quiet switching function is a key advantage, especially in residential and office buildings where noise reduction is required. Compatibility with AC and DC control voltage increases flexibility in system planning. Compliance with standard EN61095 ensures suitability for household and small installations. The 4-pole design enables safe control of 3-phase loads, with the contact configuration of 4 normally open contacts ensuring clear disconnection of circuits.