ABB 1SAE231111R0404, EAN: 4013614517822

ABB Automation ESB25-04N-04 heating contactor 0S/4Ö 110-120 V AC/DC

Installation > Modular devices / equipment installation > Heating contactor

ABB Automation ESB25-04N-04 heating contactor 0S/4Ö 110-120 V AC/DC

Lieske Part No. 1104558
Mfg Part No 1SAE231111R0404
EAN-Code 4013614517822
Manufacturer ABB
Here only 102,60 EUR
122,09 EUR incl. VAT

Further information for ABB Automation ESB25-04N-04 heating contactor 0S/4Ö 110-120 V AC/DC

General
Rated operating voltage400
Rated operation current25
Rated excitation voltage120
Voltage type (operating voltage)AC/DC
Voltage type (excitation voltage)AC/DC
Number of contacts as normally open contact0
Number of contacts as normally closed contact4
Built-in depth58
Degree of protection (IP)IP20
Width in number of modular spacings2
Slider for hand switchno
Additional equipment possibleyes
With day/night functionno
The ABB installation contactor ESB25-04N-04 is a 4-pole contactor for mounting in distribution boxes, designed for operation with a rated operational voltage of 400 V and a rated operational current of 25 A. It features an integrated coil circuit, enabling operation with both alternating and direct voltage (AC/DC). The rated control voltage is 120 V, with the voltage type also covering AC/DC. The device is specifically designed for use in electrical installations, particularly for mounting in distribution boxes, and complies with household standard EN61095. It is therefore suitable for use in residential and commercial buildings where reliable and quiet switching performance is required.

Applications
This contactor is used for controlling 3-phase loads and is suitable for applications such as electric heating appliances, water heaters, motors for pumps, ventilation systems, and other drives and lighting systems. The 4-pole configuration enables safe and complete disconnection of phases and the neutral conductor, which is particularly important for heating systems and other electrical consumers with high current demand. The integrated coil circuit ensures that the device operates absolutely hum-free and quietly during switching, which is advantageous in residential and office buildings.

Functions and Equipment in Detail
The device features 4 normally open contacts (0 normally closed / 4 normally open), which can be used for controlling auxiliary functions or signals. The contacts are designed for use in electrical circuits requiring safe disconnection and control of loads. The mounting depth is 58 mm, allowing installation in standard distribution boxes. The width of the device corresponds to 2 module units (36 mm), fitting into common mounting formats for modular installation devices. It is supplied without a manual operating lever, meaning it is operated exclusively via electrical control.

Technology Explained Simply
The integrated coil circuit allows the use of both alternating and direct voltage as control voltage, enabling flexible use in various electrical systems. Operation is achieved via a coil that generates a magnetic field when control voltage is applied, switching the contacts. The hum-free and quiet switching is a result of the special coil design that minimizes vibrations. The protection class IP20 means the device is protected against contact with fingers and against solid foreign objects, but not against splashing water or dust – it is therefore intended for indoor use only.

Compatibility and Accessories
The product range includes compatible accessories that extend the functionality. This includes the sealing cap ESB-PLK24, which protects the device against unauthorized manipulation. Additionally, the auxiliary contact block EH04-11N (1NO/1NC) is available as an accessory, which can be mounted on the left side of the contactor to enable additional switching functions. These components can be ordered separately as needed to meet specific switching logic requirements.

Mounting and Installation
The contactor is designed for modular mounting in distribution boxes and is inserted into the corresponding mounting sockets. The mounting depth of 58 mm and width of 2 module units (36 mm) conform to common standards for installation devices. Mounting requires no additional tools, while the electrical connections for contacts and coil must be made according to the respective circuit diagrams and regulations. Installation must comply with applicable standards and regulations for electrical installations.

Operational Advantages
The contactor provides reliable and quiet switching performance, achieved through the integrated coil circuit. Compatibility with AC and DC voltages increases installation flexibility. Compliance with standard EN61095 ensures suitability for use in household and commercial installations. The 4 normally open contacts allow integration into complex circuits, and accessories such as the sealing cap or auxiliary contact block extend functionality for specific requirements. Protection class IP20 ensures safe operation indoors, with the device not intended for outdoor use or in damp environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1104558
qrcode für ABB Automation ESB25-04N-04 heating contactor 0S/4Ö 110-120 V AC/DC