Further information for 2N Telecommunications 9155034D I/O Module IP Verso
General
Number of inputs
2
Number of outputs
2
Relay contact
30 V
Installation
under another module
Compatibility
2N EntryCom IP Verso
Sabotage contact
Bus cable included in delivery
The 2N EntryCom IP Verso I/O module is an expansion module for intercom systems, extending the functionality of the system with two logical inputs and two relay outputs. It is used for integrating additional sensors and actuators into existing systems to increase security and controllability. The module is specifically designed for use in the 2N EntryCom IP Verso system and can be integrated into the base module or any expansion module without requiring its own position in the module frame.
Applications
The I/O module is suitable for connecting sensors, for example for motion detection, door contact, or sabotage detection, as well as for controlling external devices such as lighting, alarm systems, or door openers. The two logical inputs allow monitoring of signals from external sensors, while the two relay outputs can be used to activate devices with a voltage up to 30 V and a current up to 1 A (AC/DC). The relay contacts are configured as changeover (NO/NC), enabling flexible load switching.
Functions and Equipment in Detail
The module features two inputs intended for connecting sensors. One of these inputs is specifically designed for a sabotage contact, which sends a signal in case of manipulation or damage to the system. The two relay outputs can be used to control devices within the range of 30 V/1 A (AC/DC). The contacts are configured as changeover (NO/NC), allowing for flexible circuiting. The module is designed to be installed underneath another module, as it does not require its own position in the module frame.
Technology Explained Simply
The integrated relay outputs enable control of external devices via electrical switching operations. The contacts switch over upon receiving a signal impulse, for example, turning on a lamp or opening a door. The inputs receive signals from sensors that detect, for example, door opening or motion. The module communicates via the internal bus system of the 2N EntryCom IP Verso system, forwarding the signals to the main module.
Compatibility and Accessories
The I/O module is specifically developed for use in the 2N EntryCom IP Verso system and can be integrated into the base module as well as into any expansion module. It is not a standalone module but serves as an extension for existing systems. The delivery includes a bus cable required for connection within the module frame. Connection is made via the integrated connectors in the module frame.
Installation and Mounting
Installation is performed by inserting the module underneath an already installed module in the module frame of the intercom system. No separate position is required, as the module adapts to the existing structure. Connection is made via the bus cable included in the delivery, which is connected to the appropriate connectors. The electrical connection of sensors and actuators is made via the designated connectors on the module.
Operational Advantages
By integrating the I/O module, existing intercom systems can be extended with additional functions without requiring additional modules or complex installations. The use of sensors and actuators enables more precise control of the environment, for example, by automatically turning lighting on and off or triggering alarms in case of sabotage attempts. The simple installation underneath an existing module reduces installation effort and the required positioning in the module frame.