LED damp-proof luminaire with IP66 protection rating and drip-edge effect to minimize dirt and dust deposits for the highest hygienic requirements. Luminaire output: 43.2 W, electronic ballast with LED converter, patented InvisiClick for clip-free mounting and opening of the cover. Cover and base trough made of CHEMO, impact-resistant, temperature and UV-resistant, injection-molded from a single piece. LED service life 100,000 hours until the luminous flux drops to 95% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 6590 lm, luminaire luminous efficacy: 153 lm/W. Color rendering Ra > 80, color temperature 4000 K. Symmetrically emitting luminaire (medium beam). Mounting using V2A standard retaining springs on the ceiling, wall or mounting rail, 5-pin plug connection terminal. Suitable for H05VV or NYM cable (10A). Ambient temperature: -25°C to +35°C. Approved for use indoors in vertical and horizontal wall mounting (see installation instructions). Luminaire wired halogen-free and silicone-free. Complies with international standards for the food industry. Designed for BESA box. Approved for use in environments where deposits of conductive dust on the luminaire can be expected (EN 60598-2-24). Protection class: SC1, 850°C glow wire tested, resistant to ammonia and cleaning agents in the FOOD industry. Luminaire wired halogen-free and silicone-free, impact resistance: IK07, dimensions: 1600 x 92 x 90 mm, weight: 3 kg.