LED damp-proof luminaire with IP66 protection class with drip-edge effect to minimize dirt and dust deposits for the highest hygienic requirements. Luminaire output: 39.9 W, electronic ballast with LED converter, patented InvisiClick for clip-free mounting and opening of the cover. Cover and base trough made of impact-resistant, temperature- and UV-resistant polymethyl methacrylate, injection-molded in one piece. LED service life 100,000 hours until the luminous flux drops to 95% of the initial value. Color location tolerance (initial MacAdam): 3. Luminaire luminous flux: 6640 lm, luminaire luminous efficacy: 166 lm/W. Color rendering Ra > 80, color temperature 4000 K. Symmetrically emitting luminaire (medium beam). Mounting using V2A standard retaining springs on the ceiling, wall or mounting rail, 5-pin plug connection terminal. Ambient temperature: -10°C to +35°C. Approved for use indoors in vertical and horizontal wall mounting (see installation instructions). Luminaire wired halogen-free and silicone-free. Complies with the requirements of international standards in the food industry. Designed for BESA box. Approved for use in environments in which deposits of conductive dust on the luminaire can be expected (EN 60598-2-24). Protection class: SC1, 650°C glow wire tested, resistant to ammonia and cleaning agents in the FOOD industry. Luminaire wired halogen-free and silicone-free, impact resistance: IK03, dimensions: 1600 x 92 x 90 mm, weight: 3 kg.