LED damp-proof luminaire with IP66 protection class with drip edge effect to minimize dirt and dust deposits for the highest hygienic requirements. Luminaire output: 28.6 W, DALI controllable luminaire (DALI only) with LED converter, patented InvisiClick for clip-free mounting and opening of the cover. Cover and base trough made of impact-resistant, temperature and UV-resistant polycarbonate (PC), injection-molded from a single piece. LED service life 100,000 hours until the luminous flux drops to 95% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 4590 lm, luminaire luminous efficacy: 160 lm/W. Color rendering Ra > 80, color temperature 4000 K. Symmetrically emitting luminaire (medium beam). Mounting using V2A standard retaining springs on the ceiling, wall or mounting rail, 5-pin plug connection terminal. Suitable for H05VV or NYM cable (10A). Ambient temperature: -25°C to +37°C. Approved for use indoors in vertical and horizontal wall mounting (see installation instructions). Note: Before specifying for use in ambient atmospheres with chemical stress, high or condensing humidity and large temperature fluctuations, please contact your consultant. Complies with the requirements of international standards of the food industry. Designed for BESA box. Approved for use in environments in which a deposit of conductive dust on the luminaire can be expected (EN 60598-2-24). Protection class: SC1, 850°C glow wire tested. Luminaire wired halogen-free and silicone-free, impact resistance: IK08, dimensions: 1600 x 92 x 90 mm, weight: 2.1 kg.