LED safety light for escape route lighting with min. 1 lux in accordance with EN 1838, room height 2.2 to 7 m, 2 high power LEDs, neutral white 4,000 K, lens made of polycarbonate (PC), optimal thermal management using a cooling plate, TECTON module, tool-free connection to TECTON light strip system, profiled sheet steel coated with polyester paint, housing color white (similar to RAL9016), light with individual battery supply for 3 hours of emergency lighting operation in permanent or standby mode, automatic test (autotest) by the light, optional central monitoring via DALI, display of the light status via status LED, NFC interface for addressing, configuration and maintenance using PROset Pen (item no.: 22170290) or PROset app, addressing also possible optically or via EZ addressing, permanent and standby mode: +5°C to +30°C, power supply: 220-240 V AC (+/- 10%), 50-60 Hz, luminaire power: 4.7 W (with battery quick charge in maintained mode), typical connected load (without battery charge): 3.2 W in maintained mode / 1.1 W in standby mode, standby and maintained mode can be set via jumper and NFC interface, IP20, SC1, luminaire wired halogen-free and silicone-free, impact resistance: IK04, dimensions: 500 x 60 x 85 mm, weight: 0.88 kg, robust, integrated battery with 3-year guarantee. Valid according to the provisions of the manufacturer's guarantee, available at https://www.zumtobel.com/media/downloads/Garantiebedingungen_DE.pdf, battery guarantee invalid if installation is not carried out until three (3) months after delivery EXW (Incoterms 2010)