LED safety light for anti-panic lighting with min. 0.5 lux in accordance with EN 1838, room height 2.2 to 7 m, 2 high power LEDs, neutral white 4,000 K, lens made of polycarbonate (PC), optimal thermal management using a cooling plate, ceiling-mounted light, screw mounting of the device carrier and the IP65 cover, light housing made of die-cast aluminum, powder-coated, housing color white (similar to RAL9016), white cover made of glass fiber reinforced PC with transparent light outlet in PC, light with individual battery supply for 1 hour emergency lighting operation in permanent or standby mode, automatic test (autotest) by the light, optional central monitoring via DALI, display of the light status via status LED, NFC interface for addressing, configuration and maintenance using PROset Pen (item no.: 22170290) or PROset app, addressing also possible optically or via EZ addressing, permanent mode: +5°C up to +30°C, standby mode: +5°C to +35°C, power supply: 220-240 V AC (+/- 10%), 50-60 Hz, lamp power: 4.7 W (with battery quick charge in maintained mode), typical connected load (without battery charge): 3.5 W in maintained mode / 1.1 W in standby mode, standby and maintained mode can be set via jumper and NFC interface, IP65, SC1, lamp wired halogen-free and silicone-free, ball-proof, plug-in terminals for through-wiring up to 2.5 mm², impact resistance: IK04, dimensions: 200 x 145 x 64 mm, weight: 0.95 kg, lamp with D mark (for use in an environment in which a deposit of conductive dust on the lamp can be expected), robust, integrated battery with a 3-year guarantee. Valid according to the terms of the manufacturer's warranty, available at https://www.zumtobel.com/media/downloads/Garantiebedingungen_DE.pdf, battery warranty void if installation is not carried out until three (3) months after delivery EXW (Incoterms 2010)