Safety Control Device SR3D – Universal Safety Control Device with Three Secure Relay Outputs

The SR3D is a universally applicable safety control device that ensures the safe shutdown of moving machine parts in hazardous situations. Equipped with three secure, redundant, and diverse relay outputs, it enables fast and reliable stoppage of machines and systems. The SR3D supports both single-channel and dual-channel emergency stop circuits, as well as the monitoring of protective doors and guards on machinery.

Specifically designed for use in combustion systems in accordance with EN 50156-1 and EN 746-2, as well as for use on ships, the SR3D meets the highest safety requirements. It is certified by TÜV Rheinland and Germanischer Lloyd and provides IP54 protection when installed in a control cabinet. The compact design allows for easy mounting on a 35 mm DIN rail.

Technical Data:

• Safety Certifications:
- Certified up to PL e, Category 4, SILCL 3 according to EN ISO 13849-1 and IEC 61508
- Type-tested for combustion systems according to EN 50156-1 and EN 746-2
- Certified by TÜV Rheinland and Germanischer Lloyd (Certificate TAE00003JF)


• Inputs and Outputs:
- 3 secure, redundant, and diverse relay outputs
- 1 auxiliary contact (signal contact) for status monitoring


• Connection Options:
- Connection of:
- Emergency stop buttons
- Safety switches
- Contactless safety switches
- Safety components with OSSD outputs (Output Signal Switching Device)


• Operating Modes:
- Single-channel or dual-channel operation
- Start behavior:
- Monitored manual start
- Automatic start


• Monitoring Functions:
- Cross-fault and ground-fault monitoring
- Feedback loop for monitoring downstream contactors or extension modules
- Cyclical monitoring of output contacts
- Self-monitoring detects errors during the next request of the safety function
- Single faults do not result in the loss of the safety function
- Status display via LED


• Housing and Design:
- Housing width: Compact design for mounting on a 35 mm DIN rail (EN 60715 TH35)
- Protection class: IP54 when installed in a control cabinet


• Installation Notes:
- Mounting on 35 mm DIN rail (EN 60715 TH35)
- Ensure adequate heat dissipation in the control cabinet
- For the AC 115 V / 230 V variant, a minimum distance of 10 mm from neighboring devices must be maintained
- Recommended distance holders: ZANDER AACHEN (Part No. 472596) to maintain defined distances


Functions:



• Monitoring and Safe Shutdown:
- The SR3D monitors the status of the emergency stop circuit (e.g., emergency stop button or safety door).
- When the emergency stop circuit is closed, the machine is enabled.
- If the safety function is requested (e.g., by opening the safety door), the SR3D immediately interrupts the release paths, ensuring the machine is safely shut down.


• Self-Monitoring:
- The SR3D detects errors through cyclical self-monitoring.
- Errors are detected no later than during the next request of the safety function, ensuring that single faults do not result in the loss of the safety function.


Scope of Delivery:



• 1x Safety Control Device SR3D
• Connection instructions
• Warranty documents