WALTHER cash register column
Housing made of brushed stainless steel (material 1.4301)
without paint
with base flange plate and holes for fastening
front panel removable for mounting and
connecting the supply lines
door with handle and ball catch
cable exit possible with the door closed
protection class: IP44
size approx.: 1560 x 435 x 220mm / HBT
Connection:
1 terminal box with series terminal 2 x 5 x 25qmm
for supply line and cable loop
Output / protection:
1 load disconnector with fuses 3P 35A D02
4 RCD circuit breakers 2P 25A/30mA -A-
4 circuit breakers (MCB) 1P 16A -B-
4 electronic WS meters 32A -certified-
4 CEE mounting boxes 16A 3P 230V 6h
Control:
1 RCD circuit breaker 2P 25A/30mA -A-
1 circuit breaker (MCB) 1P 10A -B-
1 cash register system for 4 units
-Control calibrated based on consumption (KWh)-
4 relays HS2020
Note:
Standard coin acceptor = 1¤ coins.
Please specify special versions (e.g. tokens or 2¤ coins) when ordering.
Function: The free socket is selected on the display using the keypad. After inserting coins or tokens, the coin acceptor enters the kWh value and activates the socket
. The current kWh value appears on the display and is added after each insertion (max. 99 coins). To check, the kWh value can be read on the display and
topped up again if necessary.
Check: The total consumption can be read directly on the built-in electronic meter. The meters are calibrated, officially certified and provided with a check mark
and can therefore be used for billing purposes.
Settings: Behind a locked flap in the coin cassette area, the kWh setting per coin or token can be changed at any time by the operator using the keyboard and display.
Additional function: The residual values (kWh) can be deleted manually by the operator at any time or deleted after a preset time (individually) using an Automatic Delete function.