Basic Controller 100, 2 x ETHERNET
In conjunction with the WAGO I/O system, the controller can be used as a programmable controller in ETHERNET networks. The
controller supports digital input/output modules, analog input/output modules and special modules from the 750/753 series and is suitable for data transfers of 10/100 Mbit/s.
The two ETHERNET interfaces and the integrated switch enable the field bus to be wired in a line topology. Additional infrastructure elements such as switches or hubs are therefore not required. Both interfaces support autonegotiation and auto-MDI(X).
The DIP switch can be used to specify the last byte of the IP address and the reference of the IP address.
The controller supports Modbus TCP for use in industrial environments. In addition, a variety of standardized ETHERNET protocols are supported for easy integration into the IT environment (HTTP(S), BootP, DHCP, DNS, SNTP, SNMP, SFTP).
An integrated web server provides the user with configuration options and status information of the controller.
The controller has role-based user management and supports Syslog according to RFC 5424.
The device is programmable according to IEC 61131-3, supports multitasking and has a buffered real-time clock.
The controller provides a slot for a removable storage medium. Using a memory card, device parameters, boot projects and other files can be transferred from one controller to another. The card is available as an additional drive for access via FTP.