General
Product type	2-wire pass-through terminal
Manufacturer	WAGO
Conductor cross section	0,5-10 mm²
Nominal cross section	6,00 mm²
Connection system	Push-in CAGE CLAMP®
Strip length	13-15 mm
DIN rail	35 x 15 and 35 x 7.5 mm
Colour	Grey
Actuation	Actuation tool
Ex category	Ex e II
Text	side and central labelling

The WAGO 2006-1201 is a 2-wire passage terminal block from the TOPJOB® S series, designed for secure and reliable electrical connections in industrial and building applications. The product enables passage wiring of electrical conductors and is rated for conductor cross-sections from 0.5 mm² to 10 mm², with a nominal cross-section of 6.00 mm². The terminal block is equipped with Push-in CAGE CLAMP® technology, enabling direct plug-in connection without tools for solid and fine-stranded conductors with wire end ferrules. The stripping length for conductor connection is 13 to 15 mm. The terminal block is finished in grey and intended for mounting on support rails with dimensions 35 x 15 mm and 35 x 7.5 mm. The dimensions of the terminal block are 7.5 mm (width) x 57.4 mm (height) x 39.5 mm (depth). The terminal block is suitable for applications in the Ex area category Ex e II, allowing use in potentially explosive environments under specific conditions.

Applications
The 2006-1201 is suitable for a wide range of applications, particularly in industrial electrical engineering and modern building installations. It is frequently used in enclosures, controls, and distributions where quick and secure conductor connections are required. The terminal block is suitable for classic passage wiring as well as potential distribution. Side and central labelling enables clear identification of connections, facilitating maintenance and servicing.

Functions and Equipment in Detail
The terminal block features Push-in CAGE CLAMP® technology, enabling simple and fast connection of conductors without tools. This reduces installation time and minimises the risk of incorrect connections. Operation is performed using an actuation tool, ensuring secure locking of the conductors. The terminal block is rated for conductor cross-sections from 0.5 mm² to 10 mm², with a nominal cross-section of 6.00 mm². The stripping length of 13 to 15 mm is sufficient for most applications. The terminal block is finished in grey, providing good visibility and identification in enclosures.

Technology Explained Simply
The Push-in CAGE CLAMP® technology is a universal connection that allows direct insertion of both solid and fine-stranded conductors with wire end ferrules. The terminal block automatically locks the conductor once fully inserted, ensuring a secure and reliable connection. Operation is performed with a special tool that ensures secure locking. The terminal block is designed for support rails with dimensions 35 x 15 mm and 35 x 7.5 mm, enabling universal mounting in various enclosures. Dimensions of 7.5 mm (width) x 57.4 mm (height) x 39.5 mm (depth) are suitable for use in standard enclosures.

Compatibility and Accessories
The terminal block is compatible with various accessories that extend functionality and labelling. These include labelling systems such as WMB multilabelling (e.g. 793-501/000-017, 793-5501/000-017) in various colours (light green, red, blue) as well as Mini-WSB labels (e.g. 2009-115/000-017, 2009-145/000-006). Additionally, comb bridges (e.g. 2006-405, 2006-435) and end plates (e.g. 2006-1291, 2006-1292) are available, facilitating installation and labelling. The terminal block is also compatible with aluminium support rails (e.g. 210-196) and screwless end clamps (e.g. 249-117).

Mounting and Installation
Mounting is performed on standard support rails with dimensions 35 x 15 mm and 35 x 7.5 mm. The terminal block is secured using an actuation tool, ensuring secure locking of the conductors. The stripping length of 13 to 15 mm is sufficient for most applications. Side and central labelling enables clear identification of connections. The terminal block is suitable for use in enclosures and distributions, with dimensions of 7.5 mm (width) x 57.4 mm (height) x 39.5 mm (depth) enabling universal mounting.

Operational Advantages
The WAGO 2006-1201 offers quick and secure conductor connections without tools, reducing installation time and minimising the risk of incorrect connections. The Push-in CAGE CLAMP® technology ensures a reliable connection, even with fine-stranded conductors with wire end ferrules. The terminal block is suitable for applications in the Ex area category Ex e II, allowing use in potentially explosive environments under specific conditions. Side and central labelling facilitates maintenance and servicing. Compatibility with various accessories extends functionality and labelling options.