VOKA 500m TR, EAN: 4046725046288

VOKA 500m TR Telecommunication Earth Cable A-2Y(L)2Y 6x2x0,8

Cables > Underground cables > Telecommunications underground cable

VOKA 500m TR Telecommunication Earth Cable A-2Y(L)2Y 6x2x0,8

Lieske Part No. 983708
Mfg Part No 500m TR
EAN-Code 4046725046288
Manufacturer VOKA
Here only 2,64 EUR
3,14 EUR incl. VAT

Further information for VOKA 500m TR Telecommunication Earth Cable A-2Y(L)2Y 6x2x0,8

General
Conductor diameter0,8 mm
Wire insulationPE -
Nominal voltage225 V
Test voltage2000 V
Loop resistance73,2 Ohm/km
Current carrying capacity5,1 A
Operating capacity55 nF/km
Insulation resistance5 GOhm x km
Capacitive couplings K3300 pF/400 pF at 800 Hz, 300 m
Line attenuation0,78 dB/km
Installation temperature range-20 °C to +50 °C -
Temperature range after installation-30 °C to +70 °C -
Bending radius7.5 x cable diameter -
Sheath markingconsecutive telephone handsets and meter marking white -
StrandingStar quad, basic bundle, main bundle -
Sheath constructionAluminium tape shield with plastic coating and PE sheath -
The VOKA telecommunications earth cable type A-2Y(L)2Y 6 X 2 X 0,8 is a cable specifically designed for underground installation for the transmission of telecommunications and telephony signals. It is used in telecommunications infrastructure, particularly as local loop and local connection cables, in railway station telecommunications systems, and in industrial facilities. The cable is designed for outdoor use and complies with DIN VDE 0816 Part 1, which regulates the cabling of cables with polyethylene insulation and sheath. It is not approved for high-voltage installation purposes and may only be used in fire- or explosion-hazardous operating environments with sufficient protective measures.

Applications

The cable is primarily intended for low-frequency applications and is preferably operated in the trunk network without twisting. It is suitable for connecting telephone handsets and is used in fixed installations where reliable and interference-free signal transmission over long distances is required. Installation is carried out underground, with the cable structure designed to withstand loads in the soil. Applications are in operating facilities that do not fall under special mine construction regulations (DIN VDE 0118 Parts 1 to 3).

Functions and Equipment in Detail

The cable consists of single-strand, bare copper conductors with a diameter of 0.8 mm. Each conductor is insulated with polyethylene (PE), designated as 2Y. The conductors are marked with black rings to enable easy identification and assignment in the network. The cabling is arranged in a star quad structure: four conductors form a star quad, five star quads form a basic bundle, and five or ten basic bundles form a main bundle. These bundles are twisted into the cable core, with a core wrapping present. The outer sheath consists of a layered sheath made of a 0.2 mm thick aluminium tape coated on both sides with plastic, and fused with a black PE sheath. This sheath protects the cable against external influences such as moisture and mechanical stress.

Technology Explained Simply

The technical properties of the cable are designed for stable and low-loss signal transmission. The rated voltage is 225 V, the test voltage is 2000 V, highlighting the electrical strength of the insulating material. The loop resistance is 73.2 Ohm/km, ensuring low signal attenuation. The current-carrying capacity is 5.1 A, indicating the maximum current the cable can safely transmit. The operating capacitance is 55 nF/km and the insulation resistance is 5 GOhm x km, ensuring high insulation quality. The capacitive couplings (K3) are 300 pF/400 pF at 800 Hz and 300 m, describing interference between conductors. The line attenuation is approximately 0.78 dB/km at 800 Hz, indicating low signal loss over the cable length. The temperature range during installation is between -20 °C and +50 °C, and after installation between -30 °C and +70 °C. The bending radius is 7.5 times the cable diameter, enabling flexibility during installation.

Compatibility and Accessories

The cable is designed for use with telephone handsets and in existing telecommunications networks. It is compatible with other cables of the same type and standards, particularly in cabling according to DIN VDE 0816 Part 1. The sheath marking with continuous meter marking and the printed label “telephone handset” facilitate identification and maintenance in the network. No special accessories are required, as the cable is designed for direct installation.

Installation and Mounting

Installation is carried out underground, with the installation temperature ranging between -20 °C and +50 °C. After installation, the cable can withstand temperatures from -30 °C to +70 °C. The bending radius of 7.5 times the cable diameter must be observed to avoid mechanical damage. The cable structure is designed for long-term use in soil, with PE insulation and layered sheath providing high mechanical and chemical resistance.

Operational Advantages

The cable offers high signal quality with low attenuation and low capacitive couplings, ensuring clear and interference-free transmission. The robust construction with PE insulation and layered sheath ensures long service life in soil. Clear marking of conductors and sheath facilitates maintenance and fault diagnosis. Use in existing telecommunications networks is straightforward, as standards and designs are standardized.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/983708
qrcode für VOKA 500m TR Telecommunication Earth Cable A-2Y(L)2Y 6x2x0,8