VOKA 17040231-100m

VOKA 17040231-100m installation cable CAT7A S-STP yellow 100 m

Cables > Data lines > Installation cable Cat7

VOKA 17040231-100m installation cable CAT7A S-STP yellow 100 m

Lieske Part No. 642056
Mfg Part No 17040231-100m
EAN-Code
Manufacturer VOKA
Here only 208,70 EUR
248,35 EUR incl. VAT

Further information for VOKA 17040231-100m installation cable CAT7A S-STP yellow 100 m

General
Cable typeXLAN-1500S/FTP
CategoryCat7A
Bandwidth1500 MHz
ShieldingS-STP (S/FTP)
Conductor pairs4
Conductor cross-sectionAWG22
Overall shieldcopper braid 60% with twin wire
Materialhalogen-free, flame-retardant
Flammability classDca
ColourYellow
Installation methodRing
Diameter2x8,4 mm
The VOKA installation cable Cat7, type XLAN-1500S/FTP, is a high-quality data cable for use in structured cabling systems. It is supplied in a length of 100 metres as a ring and is designed for data transmission at high speeds. The cable is yellow and corresponds to category Cat7A with a bandwidth of 1500 MHz, making it suitable for demanding network applications. It features S-STP (S/FTP) shielding, where each individual pair of conductors is shielded with foil and additionally has an overall shield made of copper braid (60 % coverage) with twin-wire shielding. These shielding systems ensure high resistance to interference and minimize electromagnetic influence, which is particularly important in environments with high electromagnetic noise.

Applications

The cable is designed for use in modern network infrastructures, particularly in offices, server rooms, industrial facilities, or for cabling in building automation systems. It is suitable for connecting network devices such as switches, routers, PCs, workstations, and other end devices that require high data rates and reliability. Its installation properties also make it suitable for applications with higher mechanical stress requirements, for example in cable ducts or when installed in walls and ceilings.

Functions and Equipment in Detail

The cable consists of four pairs of conductors, each made of AWG22 (equivalent to a diameter of approximately 0.64 mm). The conductors are arranged in a high twist, ensuring a stable and uniform structure. The overall diameter specification of 2x8.4 mm refers to the external dimensions of the cable, where the 2x indicates the ring form. Shielding is achieved through a combination of foil shielding for individual pairs and a metallic overall shield made of copper braid. This braid provides 60 % coverage and is supplemented by a twin-wire system to enhance shielding effectiveness. The use of halogen-free, flame-retardant material (LSZH, Dca) ensures increased safety in case of fire, as no toxic gases are released.

Technology Explained Simply

The designation S-STP (S/FTP) stands for Shielded-Foiled Twisted Pair, meaning that each individual pair of conductors is wrapped in foil and additionally features a metallic overall shield. This construction provides particularly high shielding against electromagnetic interference (EMV) and is therefore suitable for critical applications. The bandwidth of 1500 MHz enables data transmission at high speeds, which is more than sufficient for future network requirements such as 10 Gigabit Ethernet or more. The use of AWG22 conductors ensures sufficient conductivity and low signal loss over the entire cable length.

Compatibility and Accessories

The cable is compatible with a wide range of network accessories, particularly with CAT6A- and CAT7A-compatible connectors, Keystone modules, and patch panels. Compatible products include, for example, tool-free TP connectors CAT6A, Keystone modules in various designs (e.g. slim-line, with dust cover or cable clamp), as well as patch panels in 8- or 24-port configurations. For cabling and cable organization, cable ties, Velcro tape, and cable organizers are also available, enabling structured and orderly installation.

Installation and Mounting

Installation is typically carried out in cable ducts, wall or ceiling installations. Due to its high shielding and mechanical stability, the cable is suitable for indoor use. The cable should be installed in such a way that no sharp bends or mechanical stresses occur, which could impair performance. Connections are made using appropriate connectors, and the use of tool-free connectors can speed up installation. The use of a wire stripping tool is recommended to ensure clean and precise processing of the conductors.

Advantages in Operation

The cable offers high reliability and stability in data transmission, even over long distances. The high shielding reduces sensitivity to interference, which is particularly beneficial in environments with electrical equipment or other sources of electromagnetic interference. The use of halogen-free material increases safety in the event of fire. The length of 100 metres allows for flexible cabling planning without requiring additional connections. The yellow colour facilitates identification in cable management.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/642056
qrcode für VOKA 17040231-100m installation cable CAT7A S-STP yellow 100 m