| General |
| Cable type | XLAN-1500S/FTP - |
| Category | Cat7A - |
| Shielding | S/FTP (pair shielded, overall shield of copper braid with twin wire) - |
| Frequency bandwidth | 1500 MHz |
| Conductor cross-section | AWG22/1 - |
| Outer diameter | 8,4 mm |
| Colour | Yellow - |
| Fire load class | Dca - |
| Material | halogen-free, LSZH - |
The VOKA brand installation cable, type XLAN-1500S/FTP, is a
data cable for installation of category
Cat7A, designed for use in structured cabling systems. It is supplied in a length of 100 meters as a coil and is specifically designed for data transmission at high frequencies. The cable is
yellow in color and meets the requirements for a
halogen-free and
reduced fire load design, classified as
Dca according to EN 50575. The construction includes four pairs of conductors, each individually
foil shielded, and a
total shield made of copper braid with twin wire, ensuring high protection against electromagnetic interference. The
shielding is designed for signal transmission up to 1500 MHz, enabling use in modern networks with high bandwidths. The
conductor cross-sections are each AWG22/1, corresponding to a conductor diameter of approximately 0.5 mm, ensuring stable signal transmission. The cable has an
outer diameter of 8.4 mm and is equipped with a high braid coverage, enhancing mechanical stability and protection against external influences.
Applications
The cable is intended for use in
indoor cabling installations, particularly in offices, server rooms, or other IT infrastructures where high data rates and low interference are required. The
halogen-free and
reduced fire load design makes it suitable for buildings with enhanced fire safety requirements. The
yellow color facilitates identification in cable management and supports network structuring. Use in
structured cabling systems is typical, with the cable being connected to patch panels, keystone modules, or other network connection components.
Functions and Equipment in Detail
The cable is designed as
S-STP (S/FTP), meaning each conductor pair is individually shielded with foil and additionally features a total shield made of copper braid. This
double shielding reduces electromagnetic interference (EMV) and prevents crosstalk between conductor pairs. The
AWG22/1 conductor size ensures sufficient electrical conductivity and minimizes losses at high frequencies. The
foil and braid shielding is designed for data transmission up to 1500 MHz, enabling use in modern Gigabit and 10-Gigabit networks. The
halogen-free and
reduced fire load design (Dca) complies with fire safety requirements for building components.
Technology Explained Simply
This construction ensures high immunity against external interference and minimizes mutual interference between conductors (crosstalk). The
frequency bandwidth of 1500 MHz enables use in networks requiring high data rates, such as 10-Gigabit-Ethernet. The
halogen-free design (LSZH) means that no toxic halogen compounds are released in case of fire, increasing safety in buildings. The
fire load class Dca is a classification according to EN 50575 and refers to the fire load of the cable, which is lower than that of conventional cables.
Compatibility and Accessories
The cable is compatible with a wide range of
network connection components, such as
patch panels (e.g. 8xTP or 24xTP, CAT6A, 500 MHz),
keystone modules (e.g. RJ45, CAT6A, Slim-line, with dust cover or cable clamp), and
TP connectors (e.g. field-terminated, CAT6A, tool-free). The use of
cable ties (e.g. L100, L160, L200 mm, UV-resistant) or
velcro tape (e.g. 25 m, 20 mm) supports proper securing and routing of the cable.
Stripping tools (e.g. cutting and stripping) are required for termination. Combination with
CAT6A or CAT8 components is possible, although the maximum bandwidth of the cable (1500 MHz) exceeds that of most connected components, so overall performance is determined by the weakest component.
Installation and Mounting
Installation typically takes place indoors in conjunction with structured cabling systems. The cable can be connected via
patch panels,
keystone modules, or
network sockets. Termination is done using
TP connectors, which can be mounted tool-free or with tools. The use of
stripping tools is necessary to remove the insulation from the conductors. Securing is done with
cable ties or
velcro tape to ensure proper routing and avoid tensile stress. The
yellow color facilitates identification and structuring in cable management.
Operational Advantages
The cable offers high
signal integrity due to double shielding (foil and braid), minimizing interference and crosstalk. The
halogen-free and
reduced fire load design increases safety in buildings. The
higher frequency bandwidth of 1500 MHz enables use in future networks with high data rates. The
yellow color supports visual differentiation in cable management. The
length of 100 meters as a coil allows flexible use during installation and distribution in larger rooms or buildings.