Further information for VOKA 1007839 A-2YF(L)2Y 20x2x0,6 mm² earth cable longitudinally watertight
General
Conductor diameter
0,6 mm
Nominal voltage
225 V
Test voltage
2000 V
Loop resistance
130 Ω/km
Current carrying capacity
2,5 A
Operating capacity
52 nF/km
Insulation resistance
5 GΩ·km
Capacitive coupling K3
800pF/400pF at 800 Hz, 300 m
Line attenuation
1,04 dB/km
Installation temperature range
-20 to +50 °C
Temperature range after installation
-30 to +70 °C
Bending radius
10 x cable diameter
Pair count
20
Conductor cross-section
2 x 0,6 mm²
Outer diameter
16,5 mm
Cu number
11,3 kg/%m
Wire insulation
PE
Sheath
Shielded jacket with aluminium tape and PE jacket
Sheath marking
Telephone handset, white marking
Stranding
Star quad, basic bundle, main bundle
Filling
Petrolatum
Standard
St. III Bd. according to VDE 0816
Core winding
The VOKA telecommunications earth cable type A-2YF(L)2Y 20X2X0,6 is a longitudinally watertight cable for underground installation, designed for use in local networks and branch office installations. It is intended for the transmission of telephone signals and other data communications in the field of telecommunications. The cable complies with standard St. III Bd. according to VDE 0816 and is suitable for installation in soil, cable ducts, and pipes. The construction ensures high mechanical and electrical reliability under outdoor installation conditions.
Applications
This cable is specifically designed for use in telephone and signal transmission networks. It is used in local networks where a stable and long-lasting connection over long distances is required. The longitudinally watertight design protects the cable against moisture that may occur during underground installation and ensures long-term operational reliability. Installation must be carried out within the specified temperature ranges: -20 to +50 °C during installation and -30 to +70 °C after installation.
Functions and Equipment in Detail
The cable consists of 20 pairs, with each conductor having a diameter of 0.6 mm. The conductors are single-strand and bare, meaning without additional coating. The wire insulation is made of polyethylene (PE), ensuring high insulation performance and chemical resistance. Wire identification is achieved through black rings, enabling clear identification of individual wires. The cabling is twisted in star quads, which are grouped into basic bundles and then into main bundles. The cable core is stabilized by core wrapping, and the filling is done with petrolatum to ensure even distribution of pressure forces and mechanical stabilization.
Technology Explained Simply
The electrical properties of the cable are optimized for signal transmission. The rated voltage is 225 V, and the test voltage is 2000 V, ensuring electrical strength under load. The loop resistance of 130 Ω/km and current-carrying capacity of 2.5 A are designed for signal transmission and low current loads. The operating capacitance of 52 nF/km and insulation resistance of 5 GΩ·km ensure low signal distortion and high insulation quality. The capacitive coupling K3 is 800 pF/400 pF at 800 Hz and a length of 300 m, ensuring electrical separation between pairs. The line attenuation of 1.04 dB/km is suitable for efficient signal transmission over long distances. The outer diameter is 16.5 mm, and the bending radius is 10 times the cable diameter, allowing flexible installation.
Compatibility and Accessories
The cable is designed for installation in soil, cable ducts, and pipes. It features a layered sheath made of an aluminum tape with a thickness of 0.2 mm, coated on both sides with plastic and welded with a black PE sheath. The sheath marking is continuous with the inscription “Fernsprech-Handapparat” and includes white meter markings to enable precise length indication. The Cu content is 11.3 kg/%m, describing the metallic mass of the cable.
Installation and Mounting
Installation must be carried out within the specified temperature ranges. The cable can be installed at temperatures between -20 °C and +50 °C, and after installation, it is designed for temperatures from -30 °C to +70 °C. The bending radius is 10 times the cable diameter, allowing flexible installation without mechanical damage. The core wrapping and petrolatum filling ensure even distribution of pressure forces and prevent displacement of internal structures.
Operational Advantages
The cable offers high mechanical stability and electrical reliability. The longitudinally watertight design protects the cable against moisture that may occur during underground installation. Constant signal transmission is ensured by low line attenuation and high insulation quality. Clear wire identification and meter markings facilitate installation and maintenance. The construction according to VDE 0816 St. III Bd. ensures compliance with technical standards for telecommunications cables.