Further information for VOKA 1007838 A-2YF(L)2Y 10X2X0,6 earth cable longitudinally watertight
General
Conductor diameter
0,6 mm
Wire insulation
PE
Nominal voltage
225 V
Test voltage
2000 V
Loop resistance
130 Ω/km
Current carrying capacity
2,5 A
Operating capacity
52 nF/km
Insulation resistance
5 GΩ·km
Capacitive couplings K3
800pF/400pF (800 Hz, 300 m)
Line attenuation
1,04 dB/km
Installation temperature range
-20 °C to +50 °C
Temperature range after installation
-30 °C to +70 °C
Bending radius
10 x cable diameter
Pair count
10 x 2 x 0.6 mm
Outer diameter
13,5 mm
Sheath
Aluminium tape shield with plastic coating and PE sheath
Sheath marking
Telephone handset, white meter marking
Degree of protection
St. III Bd. according to VDE 0816
Cable type
A-2YF(L)2Y
Application
direct burial, cable channels, conduits
Utilization
Telephony, signal transmission
Stranding
Star quad, basic bundle, main bundle
Filling
Petrolatum
Core winding
The VOKA telecommunications earth cable type A-2YF(L)2Y 10X2X0,6 is a longitudinally watertight cable designed for installation in soil, cable ducts, or pipes. It serves as a connection cable in local networks and private branch exchange systems and is designed for the transmission of telephone signals and other signals. The cable complies with protection class St. III Bd. according to VDE 0816 and is therefore suitable for use in telecommunications infrastructure.
Applications
This cable is intended for use in fixed telephone and signal transmission installations. It is typically used for underground installation, for example in urban or rural networks, where a reliable and durable connection over long distances is required. The longitudinally watertight design protects the cable against moisture that could penetrate during underground installation due to ground moisture or precipitation.
Functions and equipment in detail
The cable consists of single-strand, bare copper conductors with a diameter of 0.6 mm. Each conductor is insulated with PE (polyethylene), ensuring high electrical insulation and mechanical stability. The conductors are marked with black rings to enable easy identification. The stranding is done in star quads, which are grouped into basic bundles and then into main bundles. These bundles are stranded around a cable core, with petrolatum filling and core wrapping contributing to sealing and stabilization.
Technology explained simply
The cable sheath consists of a layered sheath made of a 0.2 mm thick aluminium tape, coated on both sides with plastic and welded to a black PE sheath. This construction provides high mechanical strength and an effective protective layer against external influences. The sheath marking is continuous with the inscription “Fernsprech-Handapparat” and white meter markings, facilitating positioning and maintenance. The rated voltage is 225 V, the test voltage is 2000 V, emphasizing electrical safety and load capacity. The loop resistance is 130 Ω/km, ensuring efficient signal transmission. The current-carrying capacity is 2.5 A, sufficient for typical loads in telephone networks. The operating capacitance is 52 nF/km, and the insulation resistance is 5 GΩ·km, indicating high insulation quality. The capacitive couplings (K3) are 800 pF/400 pF at 800 Hz and a length of 300 m, characterizing signal quality and low interference. The line attenuation is approximately 1.04 dB/km at 800 Hz, ensuring clear signal transmission over long distances.
Compatibility and accessories
The cable is designed for installation in soil, cable ducts, and pipes and can be combined with appropriate connection elements, such as cable glands or cable boxes, to ensure a secure and durable installation. It is suitable for use in existing telephone and signal networks, particularly in local networks and private branch exchange systems.
Installation and mounting
Installation must consider the specified temperature ranges: laying between -20 °C and +50 °C, and after laying between -30 °C and +70 °C. The bending radius is 10 times the cable diameter, allowing flexible handling without damaging the cable. The outer diameter of the cable is approximately 13.5 mm, and the weight is 19.0 kg per 1000 m.
Operational advantages
The longitudinally watertight construction ensures high reliability and longevity of the cable, especially in moist or wet environments. The PE insulation and layered sheath offer high protection against mechanical damage and environmental influences. The clear marking of conductors and meter markings facilitate installation and maintenance. Electrical properties such as low line attenuation and high insulation resistance ensure stable and interference-free signal transmission over long distances.