VIPA 322-1HH00

VIPA 322-1HH00

Industrial Material > Automation > PLC Systems

VIPA 322-1HH00

Lieske Part No.1337026
Mfg Part No322-1HH00
EAN-Code
Manufacturer VIPA
Here only 351,62 EUR
418,43 EUR incl. VAT

Further information for VIPA 322-1HH00

SM 322 - Digital output
16x DO, in groups of 8
Relay
DC 24 V
AC 230 V
Contact rating per channel 5 A
For 20 pole front connector

SM 322 (322-1HH00)

Technical Data

Order no.: 322-1HH00
Type: SM 322

General Information:

  • Note: -
  • Features: 16x DO, in groups of 8, Relay, DC 24 V, AC 230 V, Contact rating per channel 5 A, for 20-pin front connector
  • SPEED-Bus: no

Current Consumption/Power Loss:
  • Current consumption from backplane bus: 80 mA
  • Power loss: 4 W

Technical Data Digital Outputs:

  • Number of outputs: 16
  • Cable length, shielded: 1000 m
  • Cable length, unshielded: 600 m
  • Rated load voltage: DC 30 V / AC 230 V
  • Current consumption from load voltage L+ (without load): -
  • Total current per group, horizontal configuration, 40°C: 8 A
  • Total current per group, horizontal configuration, 60°C: 8 A
  • Total current per group, vertical configuration: 8 A
  • Output current at signal "2,5 cm ( 1 inch ), rated value: 5 A
  • Signal logic output: isolated
  • Output delay of 0 cm ( 0 inch ) to "1: 10 ms
  • Output delay of 2,5 cm ( 1 inch ) to "0: 5 ms
  • Minimum load current: -
  • Lamp load: 6 W
  • Parallel switching of outputs for redundant control of a load: not possible
  • Parallel switching of outputs for increased power: not possible
  • Actuation of digital input: yes
  • Switching frequency with resistive load, max.: 0.33 Hz
  • Switching frequency with inductive load, max.: 0.33 Hz
  • Switching frequency on lamp load, max.: 0.33 Hz
  • Internal limitation of inductive shut-off voltage: -
  • Short-circuit protection of output: -
  • Trigger level: -
  • Number of operating cycles of relay outputs: -
  • Switching capacity of contacts: 5 A
  • Output data size: 2 Byte

Status Information, Alarms, Diagnostics:
  • Status display: green LED per channel
  • Interrupts: no
  • Process alarm: no
  • Diagnostic interrupt: no
  • Diagnostic functions: no
  • Diagnostics information read-out: none
  • Supply voltage display: none
  • Group error display: none
  • Channel error display: none

Isolation:

  • Between channels: yes
  • Between channels of groups up to 8: yes
  • Between channels and backplane bus: yes
  • Insulation tested with: AC 1500 V

Datasizes:

  • Input bytes: 0
  • Output bytes: 2
  • Parameter bytes: 0
  • Diagnostic bytes: 0

Housing:

  • Material: PPE
  • Mounting: Rail System 300

Mechanical Data:

  • Dimensions (WxHxD): 40 mm x 125 mm x 120 mm
  • Net weight: 290 g
  • Weight including accessories: -
  • Gross weight: -

Environmental Conditions:

  • Operating temperature: 0 °C to 60 °C
  • Storage temperature: -25 °C to 70 °C

Certifications:

  • UL certification: yes
  • KC certification: yes
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

http://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1337026
qrcode für VIPA 322-1HH00