SM 322 - Digital output
16x DO, in groups of 8
DC 24 V
2 A
For 20 pole front connector
SM 322 (322-1BH41)
Technical Data
Order no.: 322-1BH41
Type: SM 322
General Information:
- Note: -
- Features: 16x DO, in groups of 8, DC 24 V, 2 A, for 20-pin front connector
- SPEED-Bus: no
Current Consumption/Power Loss:
- Current consumption from backplane bus: 110 mA
- Power loss: 4 W
Technical Data Digital Outputs:
- Number of outputs: 16
- Cable length, shielded: 1000 m
- Cable length, unshielded: 600 m
- Rated load voltage: DC 24 V
- Current consumption from load voltage L+ (without load): 30 mA
- Total current per group, horizontal configuration, 40°C: 8 A
- Total current per group, horizontal configuration, 60°C: 8 A
- Total current per group, vertical configuration: 8 A
- Output current at signal "2,5 cm ( 1 inch ), rated value: 2 A
- Signal logic output: Sourcing Output
- Output delay of 0 to 1: 150 µs
- Output delay of 1 to 0: 100 µs
- Minimum load current: -
- Lamp load: 10 W
- Parallel switching of outputs for redundant control of a load: possible (only group outputs)
- Parallel switching of outputs for increased power: possible (only group outputs)
- Actuation of digital input: yes
- Switching frequency with resistive load max.: 1000 Hz
- Switching frequency with inductive load max.: 0.5 Hz
- Switching frequency on lamp load max.: 10 Hz
- Internal limitation of inductive shut-off voltage: L+ (-52 V)
- Short-circuit protection of output: yes, electronic
- Trigger level: 3 A
- Number of operating cycles of relay outputs: -
- Switching capacity of contacts: -
- Output data size: 2 Byte
Status Information, Alarms, Diagnostics:
- Status display: green LED per channel
- Interrupts: no
- Process alarm: no
- Diagnostic interrupt: no
- Diagnostic functions: no
- Diagnostics information read-out: none
- Supply voltage display: green LED per group
- Group error display: red SF LED
- Channel error display: none
Isolation:
- Between channels: yes
- Between channels of groups up to 8: yes
- Between channels and backplane bus: yes
- Insulation tested with: DC 500 V
Datasizes:
- Input bytes: 0
- Output bytes: 2
- Parameter bytes: 0
- Diagnostic bytes: 0
Housing:
- Material: PPE
- Mounting: Rail System 300
Mechanical Data:
- Dimensions (WxHxD): 40 mm x 125 mm x 120 mm
- Net weight: 230 g
- Weight including accessories: -
- Gross weight: -
Environmental Conditions:
- Operating temperature: 0 °C to 60 °C
- Storage temperature: -25 °C to 70 °C
Certifications:
- UL certification: yes
- KC certification: yes