Vipa 322-1BH01

Vipa 322-1BH01 - Digital output module SM322

Industrial Material > Automation > PLC Systems

Vipa 322-1BH01 - Digital output module SM322

Lieske Part No.227232
Mfg Part No322-1BH01
EAN-Code
Manufacturer Vipa
Here only 235,87 EUR
280,69 EUR incl. VAT

Further information for Vipa 322-1BH01 - Digital output module SM322

SM 322 - Digital output
16x DO, in groups of 8
1 A (per group up to 4 A)
For 20 pole front connector

SM 322 (322-1BH01)

Technical Data

Order no.: 322-1BH01
Type: SM 322

General Information:

  • Note: -
  • Features: 16x DO, in groups of 8, 1 A (per group up to 4 A), for 20-pin front connector
  • SPEED-Bus: no

Current Consumption/Power Loss:
  • Current consumption from backplane bus: 50 mA
  • Power loss: 4 W

Technical Data Digital Outputs:

  • Number of outputs: 16
  • Cable length, shielded: 1000 m
  • Cable length, unshielded: 600 m
  • Rated load voltage: DC 24 V
  • Current consumption from load voltage L+ (without load): 85 mA
  • Total current per group, horizontal configuration, 40°C: 4 A
  • Total current per group, horizontal configuration, 60°C: 4 A
  • Total current per group, vertical configuration: 4 A
  • Output current at signal "2,5 cm ( 1 inch ), rated value: 1 A
  • Signal logic output: Sourcing Output
  • Output delay of 0 to 1: 150 µs
  • Output delay of 1 to 0: 100 µs
  • Minimum load current: -
  • Lamp load: 5 W
  • Parallel switching of outputs for redundant control of a load: possible (only group outputs)
  • Parallel switching of outputs for increased power: not possible
  • Actuation of digital input: yes
  • Switching frequency with resistive load max.: 1000 Hz
  • Switching frequency with inductive load max.: 0.5 Hz
  • Switching frequency on lamp load max.: 10 Hz
  • Internal limitation of inductive shut-off voltage: L+ (-45 V)
  • Short-circuit protection of output: yes, electronic
  • Trigger level: 1.5 A
  • Number of operating cycles of relay outputs: -
  • Switching capacity of contacts: -
  • Output data size: 2 Byte

Status Information, Alarms, Diagnostics:
  • Status display: green LED per channel
  • Interrupts: no
  • Process alarm: no
  • Diagnostic interrupt: no
  • Diagnostic functions: no
  • Diagnostics information read-out: none
  • Supply voltage display: green LED per group
  • Group error display: red SF LED
  • Channel error display: none

Isolation:

  • Between channels: yes
  • Between channels of groups up to 8: yes
  • Between channels and backplane bus: yes
  • Insulation tested with: DC 500 V

Datasizes:

  • Input bytes: 0
  • Output bytes: 2
  • Parameter bytes: 0
  • Diagnostic bytes: 0

Housing:

  • Material: PPE
  • Mounting: Rail System 300

Mechanical Data:

  • Dimensions (WxHxD): 40 mm x 125 mm x 120 mm
  • Net weight: 185 g
  • Weight including accessories: 195 g
  • Gross weight: 225 g

Environmental Conditions:

  • Operating temperature: 0 °C to 60 °C
  • Storage temperature: -25 °C to 70 °C

Certifications:

  • UL certification: yes
  • KC certification: yes
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

http://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/227232
qrcode für Vipa 322-1BH01 - Digital output module SM322