Features
Type	Cable dump panel
Product colour	Grey
Rack capacity	1U
Packaging data
Quantity per pack	1 pc(s)
Technical details
Compliance certificates	RoHS

This product is a cable tilt panel from the brand Vertiv, specifically designed for the organised and secure routing of optical fibres (LWL) in 48,3 cm ( 19 inch )-racks. It is a 1U module that can be mounted in cabinets with a width of 800 mm. The cable routing plate is made of steel sheet with a thickness of 1.5 mm and is powder-coated in the colour RAL 7035 light grey. This surface coating ensures high mechanical stability and corrosion protection. The panel serves structured cable routing to avoid confusion and mechanical stress on LWL cables. It is not suitable for cabinets with a width of 600 mm or 700 mm, as these require an asymmetric arrangement that is not supported.

Cable tilt panel is the product type, specifically designed for LWL cables. The optical fibres (LWL) are optical transmission media used in networks and data centres for data transmission. Cable routing is achieved via a tilt mechanism design, enabling flexible and secure cable fixation. The rack capacity of 1U corresponds to a standard size in IT infrastructures, allowing the panel to be integrated into existing cabinet configurations.

The colour of the panel is light grey (RAL 7035), enabling visual harmonisation with other components in IT infrastructures. The powder-coated surface offers high resistance to mechanical stress and environmental influences.

Compatibility and accessories: The cable tilt panel is specifically designed for cabinets with a width of 800 mm. It is not suitable for cabinets with 600 mm or 700 mm width, as these require an asymmetric mounting that is not supported. An optional cover plate is recommended as an accessory, which is available separately and enables both cable protection and labelling.

Mounting and installation: The panel is mounted in a 48,3 cm ( 19 inch )-rack and is intended for installation in cabinets with 800 mm width. Installation typically takes place on the front side of the rack to enable cable routing from front to back. Cable routing is achieved via the tilt mechanism design, ensuring secure and flexible fixation of LWL cables.

Operational advantages: Organised cable routing reduces the risk of cable damage due to mechanical stress and facilitates maintenance and cable identification. The use of a dedicated panel for LWL cables ensures optimal routing and prevents bends that could impair signal transmission. The powder-coated surface ensures long service life and high resistance to environmental influences. Compatibility with 800 mm wide cabinets enables integration into existing infrastructures without additional modifications.

The product is delivered in a packaging unit of 1 piece. Compliance with the RoHS directive is confirmed, ensuring the use of low-hazard materials. The cable routing plate is not suitable for cabinets with 600 mm or 700 mm width, as these require an asymmetric mounting that is not supported. The cover plate is available optionally and can be used for additional protection and labelling functions.

Applications: The cable tilt panel is suitable for cable routing in IT infrastructures, particularly in data centres and networks. It is used to route LWL cables in an organised and secure manner, facilitating maintenance and cable identification. Use in cabinets with 800 mm width enables integration into existing infrastructures without additional modifications.

Functions and equipment in detail: The panel provides structured cable routing for LWL cables, with cables secured via a tilt mechanism design. The powder-coated surface ensures high mechanical stability and corrosion protection. The colour RAL 7035 light grey enables visual harmonisation with other components. Cable routing is in a 1U format, which can be integrated into existing cabinet configurations. The cover plate is available optionally and can be used for additional protection and labelling functions.

Technology explained simply: The cable tilt panel is a mechanical component mounted in a 48,3 cm ( 19 inch )-rack to route LWL cables in an organised and secure manner. Cables are secured via a tilt mechanism design, enabling flexible and secure fixation. The powder-coated surface ensures high mechanical stability and corrosion protection. The colour RAL 7035 light grey enables visual harmonisation with other components. Cable routing is in a 1U format, which can be integrated into existing cabinet configurations. The cover plate is available optionally and can be used for additional protection and labelling functions.

Compatibility and accessories: The cable tilt panel is specifically designed for cabinets with a width of 800 mm. It is not suitable for cabinets with 600 mm or 700 mm width, as these require an asymmetric mounting that is not supported. An optional cover plate is recommended as an accessory, which is available separately and enables both cable protection and labelling.

Mounting and installation: The panel is mounted in a 48,3 cm ( 19 inch )-rack and is intended for installation in cabinets with 800 mm width. Installation typically takes place on the front side of the rack to enable cable routing from front to back. Cable routing is achieved via the tilt mechanism design, ensuring secure and flexible fixation of LWL cables.

Operational advantages: Organised cable routing reduces the risk of cable damage due to mechanical stress and facilitates maintenance and cable identification. The use of a dedicated panel for LWL cables ensures optimal routing and prevents bends that could impair signal transmission. The powder-coated surface ensures long service life and high resistance to environmental influences. Compatibility with 800 mm wide cabinets enables integration into existing infrastructures without additional modifications.

The product is delivered in a packaging unit of 1 piece. Compliance with the RoHS directive is confirmed, ensuring the use of low-hazard materials. The cable routing plate is not suitable for cabinets with 600 mm or 700 mm width, as these require an asymmetric mounting that is not supported. The cover plate is available optionally and can be used for additional protection and labelling functions.