Vertiv 021101071

Vertiv 021101071 cabinet 9HE 600x600 light grey without front door

Vertiv 021101071 cabinet 9HE 600x600 light grey without front door

Lieske Part No. 1157524
Mfg Part No 021101071
EAN-Code
Manufacturer Vertiv
Here only 810,16 EUR
964,09 EUR incl. VAT

Further information for Vertiv 021101071 cabinet 9HE 600x600 light grey without front door

General
Height9 HE
ColourRAL 7035 Light grey
External dimensionsH478xB600xT600 mm
Load capacity2000 N static
Material of base framealuminium extruded profile, bare
Material of corner connectordie-cast, bare
Material of enclosure partssteel sheet, powder-coated
Vertical profiles2x 19"-aluminium vertical profiles with T-slot (large)
Rear doorlockable, with cable entry, prepared for ventilation unit
CoverClosed
Side panelsClosed, clamped on both sides
Earthing kit1
Key1
Leveling feet4
Delivery conditionMounted
The Vertiv Smaract enclosure is a 48,3 cm ( 19 inch ) frame structure with a height of 9 U, finished in RAL 7035 Light Grey. It is designed as a compact, pre-assembled enclosure for use in IT and electrical installations, particularly for smaller server or network environments. The frame has a depth of 450 mm and is equipped with a closed lid, two closed side panels, and a lockable rear door with cable entry. The rear door is prepared for mounting a ventilation unit, enabling targeted air circulation inside. The enclosure is delivered pre-assembled and is therefore immediately ready for use.

Applications
This enclosure is suitable for use in server rooms, IT infrastructures, network areas, or technical rooms where a compact yet stable mounting structure is required for IT and electronics components. The static load capacity of 2000 N allows mounting of devices with corresponding weight without stressing the structure. The closed side panels and lid provide protection against dust and mechanical impacts, while the lockable rear door ensures secure cable connections.

Functions and Equipment in Detail
The frame consists of an extruded aluminium profile, left uncoated, along with die-cast corner connectors, also uncoated. The enclosure parts are made of steel sheet, powder-coated, ensuring high corrosion resistance and uniform surface quality. The front side features a trim frame, enabling a clean aesthetic design. Two 48,3 cm ( 19 inch ) aluminium vertical profiles with T-slot (large) are mounted at the front, enabling device mounting according to the 48,3 cm ( 19 inch ) standard. The T-slot profiles are specifically designed for securing devices using screws in T-slot systems. An earthing set is included in the delivery scope to ensure safe electrical earthing of devices mounted in the enclosure. Additionally, four levelling feet are provided, allowing stable and level positioning of the enclosure on various floor surfaces.

Technology Explained Simply
The use of extruded aluminium profiles ensures high strength with low weight. The uncoated surfaces of the aluminium profiles and corner connectors are designed for a robust, low-maintenance construction. The powder-coated steel sheet parts provide a durable protective layer against corrosion and mechanical stress. The T-slot profiles allow flexible mounting of devices at standard 48,3 cm ( 19 inch ) mounting points. The lockable rear door with cable entry protects cable connections and enables orderly cable routing, while the preparation for a ventilation unit supports controlled air circulation inside the enclosure.

Compatibility and Accessories
The enclosure is compatible with accessories from Knürr, specifically developed for the Smaract series. These include mounting kits with T-slot M5, large, available in various pack sizes, as well as vertical profiles in 9 U configuration. Additionally, double castors for the SMA series are available, enabling mobile use of the enclosure. These accessories can be ordered separately to adapt the enclosure’s functionality to specific requirements.

Mounting and Installation
The enclosure is delivered pre-assembled, so no additional assembly is required. The levelling feet allow easy adjustment to uneven floors. Device mounting is performed using the pre-installed 48,3 cm ( 19 inch ) vertical profiles with T-slot. Earthing is carried out using the included earthing set. The rear door can be locked using the included enclosure key to protect cable connections.

Operational Advantages
The enclosure provides a stable, compact, and secure mounting structure for IT and electronics devices. The closed side panels and lid protect against dust and mechanical impacts. The lockable rear door ensures secure cable connections. The preparation for a ventilation unit enables targeted cooling inside the enclosure. The levelling feet ensure stable positioning, even on uneven surfaces. The use of aluminium extruded profiles and powder-coated steel sheet parts ensures high durability and low maintenance requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1157524
qrcode für Vertiv 021101071 cabinet 9HE 600x600 light grey without front door