Vertiv 011031020

Vertiv 011031020 rack accessory L-rail T 600 L 411 mm pair screwable

19 Inch-Technology > Rack Cabinets > Racksystems 31+HE

Vertiv 011031020 rack accessory L-rail T 600 L 411 mm pair screwable

Lieske Part No. 871464
Mfg Part No 011031020
EAN-Code
Manufacturer Vertiv
Here only 42,34 EUR
50,38 EUR incl. VAT

Further information for Vertiv 011031020 rack accessory L-rail T 600 L 411 mm pair screwable

General
Profile spacing440 mm
MaterialAluminium extruded profile
Wall thickness1,4 mm
Surface protectionBare
Load capacity700 N
Mounting methodScrewable from inside
Height adjustmentpossible
Scope of delivery2 mounting rails, mounting material
The Vertiv sliding rails, manufacturer number 011031020, are designed for use in 48,3 cm ( 19 inch )-enclosure and 48,3 cm ( 19 inch )-housing systems. They serve as mounting elements for rack-format devices and enable secure and stable installation of IT and network technology. The rails are supplied in pairs and consist of an aluminium extruded profile with a wall thickness of 1.4 mm, finished plain, i.e. without additional coating. The length of the rails is 411 mm, with a profile spacing between the two rails of 440 mm. These dimensions are designed for use in standard 48,3 cm ( 19 inch ) racks, where the rails can be screwed from the inside, which is particularly advantageous when mounting in enclosure rows. Height adjustment is possible to compensate for different chassis heights of devices, enabling flexible adaptation to various devices.

Sliding rails are specifically developed for installation in 48,3 cm ( 19 inch )-enclosure and -housing constructions. They are suitable for use in data centres, server rooms and other IT infrastructures where stable and secure mounting of devices is required. The rails are designed to ensure even load distribution, achieving a load capacity of up to 700 N (Newton) when the load is evenly distributed. This corresponds to a maximum static load sufficient for mounting standard IT devices. Mounting is done from the inside, which is particularly advantageous when installing in enclosure rows or when access from the outside is limited.

Aluminium extruded profile offers a good combination of strength and low weight. The material thickness of 1.4 mm ensures sufficient stability without significantly increasing the overall weight of the installation. The plain surface finish is suitable for indoor use and does not require additional coating. The rails are designed for installation in 48,3 cm ( 19 inch )-enclosure and -housing constructions, with profile spacing and length matched to standard dimensions. Height adjustment allows adaptation to devices with different chassis heights, increasing flexibility during installation.

Load capacity of 700 N with even distribution is sufficient for mounting typical IT and network devices. This specification refers to the maximum static load the rails can safely support when the load is evenly distributed across the rails. The rails are not designed for dynamic or impact loads, but for stationary use in racks. Mounting is done using the included mounting material, which is intended for securing the rails in the enclosure.

Compatibility is provided for all 48,3 cm ( 19 inch )-enclosure and -housing constructions that support standard rack mounting dimensions. The rails are supplied in pairs and can be mounted in enclosure rows or individual housings. Internal screwing enables easy installation, especially when external access is restricted. Height adjustment is another advantage, as it allows adaptation to different device heights without requiring additional adapters or modifications.

Mounting and installation are carried out using the included mounting material. The rails are inserted from the inside into the enclosure housing and screwed in place. Height adjustment is achieved by adjusting the position of the rails within the enclosure, allowing the mounting height for the device to be adapted. Installation is straightforward for professionals in the IT and electrical sectors, as no special tools or additional components are required. The rails are designed for indoor use, with no special environmental conditions such as high humidity or aggressive chemicals assumed.

Operational advantages include easy mounting, flexibility in height adjustment and high load capacity. The rails enable secure and stable mounting of IT devices, increasing the reliability of the installation. The use of aluminium extruded profiles ensures sufficient strength at low weight, facilitating handling. Delivery with mounting material ensures immediate readiness for use without additional purchases.

The delivery includes 2 sliding rails and the required mounting material. The rails are order-specific and non-cancellable, meaning they cannot be returned after ordering.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/871464
qrcode für Vertiv 011031020 rack accessory L-rail T 600 L 411 mm pair screwable