Application
PVC control cable for measuring, monitoring and control purposes on machine tools, conveyor belts, production lines, in plant construction, in air conditioning technology, in steel and steel rolling mills. Suitable for medium mechanical stress for flexible use with free movement without tensile stress and without forced movement in dry, damp and wet rooms and outdoors (permanently installed). Must not be laid directly in the ground or water. The numbering is applied in such a way that the respective numbers can be easily recognized even if the sheath is only briefly stripped. Base lines prevent the individual numbers from being confused. The green-yellow protective conductor is in the outer layer.
Black special PVC outer jacket, UV-resistant. Due to the extended nominal voltage range and good UV resistance, this cable is mainly used in southern European, Arabic, Asian and eastern countries. The high shielding density ensures interference-free transmission of signals and impulses.
EMC = Electromagnetic Compatibility
Note
To optimise the EMC properties, we recommend a large-area all-round contact on both sides of the copper braid
Structure

• Bare copper wire, fine-wire according to DIN VDE 0295 Class 5 or IEC 60228 Class 5
• Special PVC wire insulation, T12 according to DIN VDE 0281 Part 1
• Black wires with continuous white number print according to DIN VDE 0293
• Yellow-green protective conductor in the outer layer, from 3 wires
• Wires stranded in layers with optimum lay lengths
• Shielding braid made of tinned copper wires, coverage approx. 85%
• Special PVC outer jacket, black, type TM2 according to DIN VDE 0281 Part 1
• largely oil-resistant Chemical resistance
• PVC self-extinguishing and flame-retardant, test type B according to VDE 0472 Part 804 and IEC 60332-1
Technical data

• special control cable made of thermoplastic PVC
Temperature range: moving -5 °C to +70 °C
fixed -40 °C to +80 °C
Nominal voltage: U(0)/U 0.61/1kV
Test voltage: 4000 V Insulation
resistance: at least 20 MOhm x km
Current carrying capacity: in accordance with DIN VDE 0298 Part 4
Minimum bending radius: 20 x cable Ø
Radiation resistance: up to 80x10^6 cJ/kg (up to 80 Mrad)
UV-resistant
Coupling resistance: max. 250 Ohm/km.