VDE-Kabel O6013.3, EAN: 4049759026868

VDE-Kabel O6013.3 LWL Patch Cable 3m ST-ST 50/125um OM2

Cables > Data lines > Fiber Optic Patch Cables

VDE-Kabel O6013.3 LWL Patch Cable 3m ST-ST 50/125um OM2

Lieske Part No. 525779
Mfg Part No O6013.3
EAN-Code 4049759026868
Manufacturer VDE-Kabel
Here only 7,16 EUR
8,53 EUR incl. VAT

Further information for VDE-Kabel O6013.3 LWL Patch Cable 3m ST-ST 50/125um OM2

Technical data
Connector typestandard
Number of fibres/ports2 (Duplex)
Side BST/UPC (flat polish)
Product typePatch cable
Fibre typeOM2_50/125u
Length in metres3 m
Side AST/UPC (flat polish)
The product is a patch cable from the brand VDE-Kabel, manufacturer's number O6013.3, specifically designed for use in the field of data cabling. It is an LWL patch cable (optical fiber) in duplex format, meaning it has two fibers intended for bidirectional data transmission in networks. The cable length is 3 meters, with the fibers implemented as multimode gradient-index fiber having a core diameter of 50 µm and a cladding diameter of 125 µm. This fiber type corresponds to the OM2 standard, suitable for medium transmission distances and bandwidths in local area networks (LAN). At both ends of the cable, ST connectors with UPC polish (Ultra Physical Contact) are mounted, ensuring optimal optical connection and minimal signal loss. The connectors are standard, without any special modifications.

Applications

The cable is designed as an indoor cable and intended for use in enclosed spaces such as server rooms, data centers, or IT infrastructures. It is used to connect fiber optic network devices such as switches, routers, fiber optic transceivers, or other LWL-compatible end devices. Due to the OM2 fiber, it is suitable for data transmissions ranging from 100 Mbit/s to 1 Gbit/s over distances up to 550 meters, although the actual range depends on the network technology used and the optical properties of the entire connection. Use in outdoor environments is not intended, as no specific protection ratings such as IP67 or similar environmental durability standards are mentioned.

Functions and Equipment in Detail

The cable features two ST connectors at both ends, each with a UPC polish. This polish type ensures a flat, smooth surface on the fiber end face, minimizing reflections and improving signal quality. The connectors are designed for easy handling and mechanical stability. The fibers themselves are configured as a duplex connection, meaning one fiber is used for transmission and the other for reception. The multimode gradient-index fiber (50/125 µm) enables efficient light guidance through a continuous refractive index gradient in the core, stabilizing signal transmission over the intended distance.

Technology Explained Simply

The designation OM2 refers to a specific category of multimode fibers optimized for medium transmission performance. The fiber has a core of 50 µm and a cladding of 125 µm, offering a good balance between bandwidth and light guidance. The ST connectors are a widely used connector type in fiber optic networks, secured by a screw or clamp mechanism. The UPC polish ensures the fiber end face is cut perpendicular to the axis, reducing reflections at the interface and improving signal transmission. The cable length of 3 meters is a standard length for use in server rooms, where devices are mounted in close proximity.

Compatibility and Accessories

The cable is compatible with all devices supporting ST connectors with UPC polish. It can be used in conjunction with other LWL components such as fiber cleaning pens for SC/FC/ST/E2000 connectors, fiber cleavers, stripping tools for various fiber diameters (125/250/900 µm), or LWL testing devices (e.g. VFL, laser light testers). For cable organization and routing within racks, cable ties, velcro straps, or spiral organizers are suitable. These accessories support orderly cable routing and protect the fibers from mechanical damage.

Installation and Mounting

Installation is performed by simply inserting the ST connectors into the corresponding sockets of the network devices. The connectors feature a locking mechanism ensuring a secure connection. During installation, care must be taken to avoid excessive bending or stress on the fibers to prevent breaks or signal loss. It is recommended to use cleaning tools before connecting to avoid contamination on the connector surfaces.

Operational Advantages

The cable provides reliable and stable data transmission over the specified distance of 3 meters. The use of OM2 fibers and ST connectors with UPC polish ensures low signal loss and high signal quality. The standard connector design allows universal use in existing infrastructures. The 3-meter cable length is ideal for use in server rooms and IT infrastructures, where devices are mounted in close proximity. The connection is quick to establish and does not require special tools, apart from optional cleaning and testing tools.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/525779
qrcode für VDE-Kabel O6013.3 LWL Patch Cable 3m ST-ST 50/125um OM2