Application:

Wherever special protection against fire and fire damage is required for people and property and where high safety requirements must be met. Indoors and outdoors. Do not lay directly in soil or water. If exposed to flames, they prevent the spread
of a fire and produce extremely little smoke. No release of corrosive or toxic
gases. They are considered to be protectively insulated.
Structure:
Conductor: bare copper conductor in accordance with VDE 0295,
round single-wire or multi-wire
or sector multi-wire
> 50 mm^2 are compacted
Core insulation: cross-linked polyethylene 2XI1
Core identification: in accordance with VDE 0293-308 Filling jacket
Concentric conductor: made of bare copper wires with
opposing holding spiral made of
copper tape, PETP tape
Outer jacket: polymer mixture halogen-free
in accordance with VDE 0207 T. 24
Jacket color: black
Technical data:
Nominal voltage: 06/1 kV
Test voltage: 4000 V
Temperature range: -5 °C - +70 °C (when laying)
-30 °C - +70 °C (after laying)
Operating temperature: +90 °C (max.)
Bending radius: 12 x cable diameter
(multi-wire)
Tests:
Flammability: in accordance with VDE 0472 T. 804,
test type C (=IEC 332-3)
Corrosiveness of fire gases: according to VDE 0472 T. 813
Smoke gas density: according to VDE 0472 T. 816,
test type C (=IEC 1034-1)
Halogen-free: according to VDE 0472 T. 815
Ozone resistance: according to VDE 0472 T. 805
Properties:
halogen-free,
low fire spread,
minimal smoke development,
no corrosive gases,
do not lay directly in soil or water.