| General |
| Nominal voltage | 300 V |
| Test voltage | 800 V |
| Loop resistance | 73,2 Ohm/km |
| Current carrying capacity | 5,1 A |
| Operating capacity | 100 nF/km |
| Insulation resistance | 100 MOhm x km |
| Capacitive coupling K1 | 300 pF |
| Capacitive coupling K9-12 | 100 pF |
| Line attenuation | 1,1 dB/km |
| Temperature range | -5 to +50 °C |
| Operation temperature | +70 °C |
| Bending radius | 7.5 x cable diameter - |
| Bend radius single without tension | 2.5 x cable diameter - |
| Burning behaviour | VDE 0472 Part 804, test type C (IEC 332-1) - |
| Core diameter | 0,8 mm |
| Wire insulation | Cross-linked polymer HI1 - |
| Conductor marking | according to VDE 0815 - |
| Stranding | 4 conductors to star quad, 5 star quads to bundle - |
| Static shield | Plastic-laminated metal foil (metal side inward) and bare twin wire - |
| Outer sheath | Polyolefin blend HM2 - |
| Sheath colour | Grey RAL 7001 - |
| Features | halogen-free, low flame spread, minimal smoke development, no corrosive gases - |
The J-H(ST)H 10X2X0.8 Bd grey 1000m TR is a halogen-free installation cable from manufacturer VDE-Kabel, specifically designed for use in telecommunication and information processing systems. It is used for the transmission of telephone, measurement, and signal information, as well as in telephone station and private branch exchange installations for telecommunication systems of all classes. The cable is suitable for use in dry and damp operating environments and can be installed on, in, and under plaster. Its static shield ensures reliable limitation of external electromagnetic interference fields, securing signal quality in critical applications. In the event of fire, the halogen-free composition prevents the formation of corrosive gases and minimizes smoke development, thereby reducing fire-related damage.
Applications
This cable is intended for use in buildings with high requirements for fire protection technology and signal integrity. It is used in office buildings, industrial plants, administrative buildings, and other facilities where telecommunication and information networks are installed. Installation typically takes place indoors, and the cable can be used in both open and plastered installations. The low flame propagation and flame-retardant properties of the outer sheath make it particularly suitable for systems requiring high safety in the event of fire.
Functions and Equipment in Detail
The cable consists of bare, single-strand copper conductors with a diameter of 0.8 mm. Each conductor is insulated with cross-linked polymer HI1 according to VDE 0207 Part 23, ensuring high electrical insulation and mechanical stability. The conductors are marked according to VDE 0815 to enable clear identification. The cabling is arranged in star quads (4 conductors per star quad), with 5 star quads bundled together. The bundle is layered and taped to ensure structural stability. The static shield consists of a plastic-laminated metal foil (metal side inward) and a bare twin wire, which enhances electromagnetic shielding. The outer sheath is made of a polyolefin blend HM2 according to VDE 0207 Part 24, which is halogen-free and flame-retardant. The sheath color is grey, corresponding to RAL 7001.
Technology Explained Simply
The rated voltage is 300 V, and the test voltage is 800 V, defining the cable’s electrical load capacity. The loop resistance is 73.2 Ohm/km, ensuring low signal loss over long connections. The current-carrying capacity is 5.1 A, indicating the maximum current the cable can safely transmit. The operating capacitance is 100 nF/km, describing the electrical capacitance per unit length and relevant for signal transmission. The insulation resistance is 100 MOhm x km, indicating the cable’s insulation quality. The capacitive coupling K1 is 300 pF (100 m, 800 Hz), and K9-12 is 100 pF, describing interference between conductors. The cable attenuation is approximately 1.1 dB/km at 800 Hz, indicating signal attenuation over length. The temperature range is from -5 °C to +50 °C, with a maximum operating temperature of +70 °C. The bending radius is 7.5 times the cable diameter for normal bending and 2.5 times for single bending without tension. The burning behavior conforms to VDE 0472 Part 804, test type C (equivalent to IEC 332-1), confirming its flame-retardant properties.
Compatibility and Accessories
The cable is designed for use in telecommunication and information processing systems and can be connected with standard cable connectors and outlets suitable for halogen-free cables. The use of appropriate connection components is required to maintain the cable’s electrical and mechanical properties.
Installation and Mounting
Installation is carried out indoors, where the cable can be laid on, in, and under plaster. Bending strength is defined by a bending radius of 7.5 times the cable diameter for normal bending and 2.5 times for single bending without tension. Installation does not require special tools, although the use of suitable cable cutters and connectors is recommended to preserve electrical properties. The cable is suitable for use in dry and damp operating environments, with a maximum operating temperature of +70 °C.
Operational Advantages
The halogen-free composition of the cable reduces the formation of corrosive gases and minimizes smoke development in case of fire, increasing building safety. The flame-retardant outer sheath prevents fire propagation. The static shield ensures reliable limitation of external electromagnetic interference fields, securing signal quality in critical applications. The low cable attenuation and low loop resistance enable efficient signal transmission over long distances. The cable is suitable for use in various operating environments, with a maximum operating temperature of +70 °C.