VDE-Kabel H07V-U6GR-R100

VDE-Kabel H07V-U 6,0 GR Cable gray 100m

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

VDE-Kabel H07V-U 6,0 GR Cable gray 100m

Lieske Part No. 611456
Mfg Part No H07V-U6GR-R100
EAN-Code
Manufacturer VDE-Kabel
Here only 199,18 EUR
237,03 EUR incl. VAT

Further information for VDE-Kabel H07V-U 6,0 GR Cable gray 100m

General
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter min.
Flame retardancyaccording to VDE 0472 Part 804, test type B (IEC 332-1)
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colourgrey according to VDE 0293-308
Cross section6,0 mm²
The H07V-U 6.0 GR wiring cable from VDE-Kabel is a PVC-insulated single-core cable for use in electrical installations. It is intended for installation in conduits, on, in, and under plaster, as well as in closed installation channels. The cable is also designed for internal wiring of devices, control panels, and distributors, and is suitable for protected installations in and on luminaires. Direct installation on trays, channels, or troughs is not permitted.

Applications
This cable is designed for indoor use, where permanent, fixed installation in closed channels or conduits is required. It is suitable for electrical systems in residential and commercial buildings, where stable and secure connections between power sources and consumers are necessary. Use in luminaires requires a protected environment to safeguard the cable from mechanical stress and environmental influences.

Functions and Features in Detail
The cable consists of a bare, single-strand copper conductor, ensuring high electrical conductivity. Insulation is provided with PVC in accordance with VDE 0207, offering high mechanical strength and chemical resistance. The sheath color complies with VDE 0293-308 and is gray (RAL 7000), enabling good visibility and identification in installations. The cable is rigid, requiring fixed installation in conduits or channels, but providing high mechanical stability.

Technical Explanation
The rated voltage is 450/750 V, indicating the maximum voltage the cable can safely transmit. The test voltage of 2500 V is used for quality control, ensuring the insulation does not break down under increased voltage. The maximum operating temperature is +70 °C, with the cable tolerating temperatures from +5 °C to +70 °C during installation. After installation, it can withstand temperatures from -30 °C to +70 °C, allowing use in rooms with seasonal temperature fluctuations. The minimum bending radius is 15 times the cable diameter, to prevent damage to the insulation or conductor from excessive bending. Flame retardancy according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), ensures the cable does not easily ignite and does not propagate flame in case of fire.

Compatibility and Accessories
The cable is designed for use in standard installation systems and can be connected with common installation screws, terminals, and connection components. It is not intended for direct installation on open trays or channels, as this could compromise mechanical and electrical integrity. Installation in closed channels or conduits is the recommended mounting method.

Installation and Mounting
Installation is carried out by routing the cable in conduits or closed installation channels. The cable must maintain a bending radius of at least 15 times its diameter to avoid damaging the insulation. Installation takes place indoors, with ambient temperatures during installation ranging from +5 °C to +70 °C. After installation, the cable can operate in environments with temperatures from -30 °C to +70 °C. Connections are made using suitable terminals or screw connections designed for a cross-section of 6.0 mm².

Operational Advantages
The cable offers high mechanical strength due to PVC insulation and a bare copper conductor. Flame retardancy according to VDE 0472 Part 804, Test Method B, enhances safety in case of fire. Stable installation in conduits or channels ensures long-lasting, maintenance-free installation. The gray sheath color according to VDE 0293-308 allows clear identification in complex installations. The cable is designed for indoor use and meets requirements for electrical safety and reliability in residential and commercial buildings.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/611456
qrcode für VDE-Kabel H07V-U 6,0 GR Cable gray 100m