| General |
| Nominal voltage | 450/750 V |
| Test voltage | 2500 V |
| Installation temperature range | +5 °C - +70 °C |
| Temperature range after installation | -30 °C - +70 °C |
| Operation temperature | +70 °C |
| Bending radius | 15 x cable diameter |
| Flame retardancy | VDE 0472 T. 804 test type B |
| Conductor | Copper bare, solid |
| Insulation | PVC according to VDE 0207 |
| Sheath colour | according to VDE 0293-308 |
The H07V-U 4 SW wiring cable from VDE-Kabel is a PVC-insulated single-core cable for use in electrical installations. It is intended for installation in conduits, on, in, and under plaster, as well as in closed installation channels. The cable is also designed for internal wiring of devices, control panels, and distributors, and can be used in protected installations within and on luminaires. Direct installation on trays, gutters, or troughs is not permitted.
Applications
This cable is designed for use in dry rooms and is suitable for electrical systems in buildings, particularly in switching and distribution systems. It is commonly used in electrical installations in residential construction, commercial and industrial facilities, as well as in lighting technology. Installation must take place in closed cable routes; the cable must not be installed directly on open supports or in open channels.
Functions and Features in Detail
The cable consists of a bare, single-strand copper conductor, insulated with PVC according to VDE 0207. The sheath color complies with standard VDE 0293-308, with black (RAL 9005) specified. The cable is rated for a nominal voltage of 450/750 V, making it suitable for most standard low-voltage applications. The test voltage is 2500 V, confirming the electrical strength of the insulation.
Technical Explanation
The maximum operating temperature is +70 °C. The cable may be installed at temperatures between +5 °C and +70 °C during installation. After installation, it can be operated at temperatures from -30 °C to +70 °C. The minimum bending radius is 15 times the cable diameter, requiring careful bending during installation to avoid damage. Flame retardancy corresponds to test method B according to VDE 0472 Part 804 (equivalent to IEC 332-1), meaning that during a fire test, the cable does not produce flames in a limited area, thus presenting limited fire hazard.
Compatibility and Accessories
The cable is designed for use in standard installation systems and can be connected with common terminals, plug connectors, and other connection elements. It is suitable for use in electrical installations according to VDE 0281-3, with exact standardization depending on the specific application and local regulations. The cable is supplied in a length of 100 meters on a reel, enabling continuous installation without additional connections.
Installation and Mounting
Installation is carried out in closed cable routes, with the cable being laid in conduits, under plaster, or in installation channels. Installation must occur at temperatures between +5 °C and +70 °C. The cable must not be excessively bent or stretched; the minimum bending radius is 15 times the cable diameter. Connections are made using appropriate terminals or plug connectors, ensuring a secure and durable electrical connection.
Operational Advantages
The cable offers high electrical strength and is suitable for use in dry rooms. The PVC insulation ensures good mechanical stability and resistance to environmental influences. Flame retardancy according to VDE 0472 Part 804, test method B, increases safety in the event of fire. Installation in closed channels protects the cable from mechanical stress and environmental influences, ensuring long service life and reliable performance. The cable is available in a length of 100 meters, enabling efficient installation in larger systems.