VDE-Kabel H07V-U10SW-R100

VDE-Kabel H07V-U10SW-R100 cable 10 mm² black

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

VDE-Kabel H07V-U10SW-R100 cable 10 mm² black

Lieske Part No. 968577
Mfg Part No H07V-U10SW-R100
EAN-Code
Manufacturer VDE-Kabel
Here only 168,96 EUR
201,06 EUR incl. VAT

Further information for VDE-Kabel H07V-U10SW-R100 cable 10 mm² black

General
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyaccording to VDE 0472 T. 804 test type B (=IEC 332-1)
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colouraccording to VDE 0293-308
The cable H07V-U 10 SW from VDE-Kabel is a PVC-insulated wiring cable designed for use in electrical installations indoors. It is suitable for installation in conduits, on, in, and under plaster, as well as in closed installation channels. Additionally, it is used for internal wiring of devices, control panels, and distributors, as well as for protected installation in and on luminaires. The cable is not intended for direct installation on trays, gutters, or troughs, as this could compromise mechanical and electrical safety.

Applications

The cable is designed for use in electrical installations indoors, particularly in residential and commercial buildings. It is commonly used in electrical installations for supplying lighting, socket outlets, and control panels. Installation takes place in closed channels or conduits, protecting the cable from mechanical stress and environmental influences. Use in luminaires requires protected mounting to maintain insulation integrity and electrical functionality.

Functions and Equipment in Detail

The cable consists of a bare, single-strand copper conductor, ensuring stable electrical conduction. Insulation is provided by PVC in accordance with VDE 0207, a standard for insulating materials in electrical engineering. The sheath color complies with the standard VDE 0293-308, which regulates color coding for electrical cables. Black is the standard color and serves for visual differentiation during installation.

Technology Explained Simply

The rated voltage of 450/750 V means the cable is suitable for electrical systems with an operating voltage up to 750 V (e.g., 230 V/400 V). The test voltage of 2500 V is used for quality testing and ensures the insulation does not break down under increased voltage. The maximum operating temperature is +70 °C, defining the thermal load capacity of the cable. During installation, the temperature must be between +5 °C and +70 °C; after installation, operation is possible between -30 °C and +70 °C. The minimum bending radius is 15 times the cable diameter to ensure mechanical integrity of the insulation. Flame retardancy according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), means the cable does not propagate flames during a fire test and thus presents a low fire hazard.

Compatibility and Accessories

The cable is compatible with standard installation techniques and materials, such as PVC conduits, installation shafts, and distributors. It can be combined with other cables of type H07V-U, either of the same or different cross-sectional area, provided the respective requirements for voltage, temperature, and flexibility are met. Use in control panels requires compliance with relevant standards for mounting and connecting cables.

Installation and Mounting

Installation is carried out in closed channels or conduits, and the cable must not be laid directly on unprotected surfaces such as trays or gutters. Flexibility requires a minimum bending radius of 15 times the cable diameter to prevent cracks in the insulation. Installation should occur at temperatures between +5 °C and +70 °C to ensure optimal processing of the PVC insulation. After installation, the cable must be operated within a temperature range of -30 °C to +70 °C to maintain functionality and safety.

Advantages in Operation

The cable offers high electrical safety due to PVC insulation and a test voltage of 2500 V. Flame retardancy according to VDE 0472 Part 804, Test Method B, reduces fire hazard in the event of a short circuit. Mechanical stability provided by the single-strand copper conductor and PVC insulation ensures long service life. Use in closed channels and conduits protects the cable from external influences and increases installation safety. Color coding according to VDE 0293-308 facilitates identification and maintenance of cables during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/968577
qrcode für VDE-Kabel H07V-U10SW-R100 cable 10 mm² black