| General |
| Nominal voltage | 450/750 V |
| Test voltage | 2500 V |
| Installation temperature range | +5 °C - +70 °C |
| Temperature range after installation | -30 °C - +70 °C |
| Operation temperature | +70 °C |
| Bending radius | 15 x cable diameter |
| Flame retardancy | according to VDE 0472 Part 804, test type B (IEC 332-1) |
| Conductor | Copper bare, solid |
| Insulation | PVC according to VDE 0207 |
| Sheath colour | according to VDE 0293-308 |
The H07V-U 1.5 RT wiring cable from VDE-Kabel is a single-core, rigid PVC-insulated wire cable designed for use in electrical installations indoors. It is particularly suitable for installation in conduits, on, in, and under plaster, as well as in closed installation channels. The cable is also used for internal wiring of devices, control panels, distributors, and for protected installations in and on luminaires. The sheath colour conforms to standard VDE 0293-308, with the cable offered here in red (RAL 3000).
Applications
The cable is designed for use in electrical systems indoors, particularly in buildings with fixed electrical installations. It is suitable for installation in closed systems such as conduits, installation channels, or under plaster, where it is protected from mechanical stress and environmental influences. Use in open installations, such as on trays, gutters, or troughs, is explicitly prohibited, as this may compromise mechanical and electrical safety.
Functions and Features in Detail
The cable consists of a bare, single-strand copper conductor, ensuring stable and conductive current transmission. Insulation is provided by PVC according to VDE 0207, a proven material for electrical insulation that resists mechanical stress and environmental influences such as moisture or temperature fluctuations. The sheath colour is standardised according to VDE 0293-308, enabling uniform identification and easy recognition during installation.
Technical Explanation
The rated voltage is 450/750 V, meaning the cable is suitable for use in electrical systems with an operating voltage up to 750 V between phase and neutral, and up to 450 V between phases. The test voltage of 2500 V serves quality control and ensures electrical insulation under high voltage conditions. The maximum operating temperature is +70 °C, and during installation, the cable must withstand temperatures from +5 °C to +70 °C. After installation, it can be exposed to temperatures from -30 °C to +70 °C, allowing use in rooms with seasonal temperature variations. The minimum bending radius is 15 times the cable diameter to prevent damage to the insulation or conductor during bending. Flame retardancy according to VDE 0472 Part 804, test method B (equivalent to IEC 332-1), ensures the cable does not contribute to rapid flame spread in case of fire, enhancing safety in electrical installations.
Compatibility and Accessories
The cable is designed for use in standard installation systems and can be combined with common installation techniques such as conduit installation, channel installation, or installation under plaster. It is suitable for use in control panels, distributors, and devices requiring a rigid wire cable with PVC insulation. The red colour (RAL 3000) serves as identification and is commonly used in electrical installations for specific functions, such as powering lighting systems.
Installation and Mounting
Installation is carried out in closed systems, with the cable routed in conduits or channels. Installation must respect the minimum bending radius of 15 times the cable diameter to avoid damage. Temperature conditions during installation (+5 °C to +70 °C) must be observed to ensure proper installation. The cable is not intended for direct installation on open supports such as trays or gutters.
Operational Advantages
The cable offers high mechanical stability due to the rigid copper conductor and PVC insulation. Flame retardancy according to VDE 0472 Part 804, test method B, increases safety in electrical installations. Standardisation of the sheath colour according to VDE 0293-308 simplifies identification and maintenance. Use in closed installation systems protects the cable from external influences and ensures long service life.