VDE-Kabel H07V-U1,5OR-R100

VDE-Kabel H07V-U 1,5 orange cable 100m

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

VDE-Kabel H07V-U 1,5 orange cable 100m

Lieske Part No. 456902
Mfg Part No H07V-U1,5OR-R100
EAN-Code
Manufacturer VDE-Kabel
Here only 25,75 EUR
30,64 EUR incl. VAT

Further information for VDE-Kabel H07V-U 1,5 orange cable 100m

General
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyaccording to VDE 0472 T. 804 test type B (=IEC 332-1)
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colouraccording to VDE 0293-308
The H07V-U 1.5 ORANGE is a PVC-insulated wiring cable from manufacturer VDE-Kabel, designed for use in electrical installations indoors. It is intended for installation in conduits, on, in, and under plaster, as well as in closed installation channels. The cable is also suitable for internal wiring of devices, control panels, distributors, and for protected installation in and on luminaires. The outer sheath colour complies with standard VDE 0293-308 and is orange, enabling clear identification within the installation network.

Applications
This cable is intended for use in dry rooms and is suitable for wiring in electrical systems with a rated voltage of 450/750 V. It is not suitable for direct installation on trays, troughs, or channels, as this could compromise the mechanical and electrical integrity of the cable. Typical use is in closed installation systems, where the cable is protected from external influences such as mechanical stress or moisture.

Functions and Features in Detail
The cable consists of a bare, single-strand copper conductor, ensuring stable electrical conduction. Insulation is provided by PVC in accordance with VDE 0207, ensuring high electrical insulation and mechanical strength. The orange outer sheath colour is standardised according to VDE 0293-308 and serves for unambiguous identification within the installation network. The cable is flame-retardant in accordance with VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), ensuring limited flame propagation in case of fire.

Technical Explanation
The rated voltage of 450/750 V means the cable is designed for alternating voltages up to 450 V and direct voltages up to 750 V. The test voltage of 2500 V serves quality assurance and ensures the insulation remains stable even under increased voltage. The maximum operating temperature is 70 °C, and the cable may be installed at temperatures between +5 °C and +70 °C. After installation, the cable is rated for operating temperatures from -30 °C to +70 °C, allowing use in cooler environments. The minimum bending radius is 15 times the cable diameter to prevent damage to the copper conductor from excessive bending.

Compatibility and Accessories
The cable is designed for use in standard installation systems and can be connected using common installation screws, terminals, and connection components. It is compatible with other cables of type H07V-U and can be used as a replacement or addition in existing installations. The use of appropriate connection components is required to ensure a safe electrical connection.

Installation and Mounting
Installation is carried out in closed conduits, channels, or under plaster. The cable must not be installed directly on trays, troughs, or channels. Installation should occur at temperatures between +5 °C and +70 °C. After installation, the cable is rated for operating temperatures up to +70 °C. The minimum bending radius of 15 times the cable diameter must be observed to avoid mechanical damage. The cable is intended for use in dry rooms.

Operational Advantages
The cable provides high electrical insulation through PVC insulation and stable mechanical structure through the single-strand copper conductor. The flame-retardant design in accordance with VDE 0472 Part 804, Test Method B, increases safety in case of fire. The standardised orange outer sheath colour facilitates identification within the installation network. The cable is suitable for a wide range of indoor installation scenarios and provides a reliable electrical connection at a rated voltage of 450/750 V.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/456902
qrcode für VDE-Kabel H07V-U 1,5 orange cable 100m